Hewlett Packard 122AR Осциллограф
Производитель:
Модель:
122AR
Дата:
1959
Категория:
Группа:
Описание:

Информация

The Model 122A is a dc to 200 kc dual-trace cathode-ray oscilloscope. It has accurately calibrated input sensitivity and sweep-speed ranges. This Oscilloscope features dc-coupled differential amplifiers and dual-trace operation. Differential amplifiers are useful since they reject the common-mode (in-phase) part of the input while amplifying the differential (out-of-phase) part. For instance, they will reject hum pick-up while amplifying the desired signal. In addition, using differential amplifiers has other advantages. Normally dc amplifiers are difficult to keep stable. Changes such as aging and changes of potentials cause this drift. However, these changes are of the common-mode type and are rejected by differential amplifiers. Thus differential amplifiers are also used to stabilize dc amplifiers. Dual-trace operation is obtained with an electronic switch. This permits observation of two signals at the same time. The two signals may be viewed either alternately during consecutive sweeps or chopped on each sweep. Chopped operation involves switching rapidly between the two signals so that both appear to be traced simultaneously. The most useful type of presentation in each case will depend upon the frequencies involved. Generally, chopped operation is used with low frequency signals. These signals may also be viewed separately or with their difference (B-A) displayed on the screen.

показать больше

Обслуживание и Руководство пользователя
Hасто́льная кни́га тип:
Обслуживание и Руководство пользователя
Страницы:
88
Размер:
28.78 Mbytes (30175725 Bytes)
Язык:
english
Пересмотр:
Hасто́льная кни́га ID:
122A001
Дата:
Качество:
Отсканированы документу, все читается.
Дата загрузки:
2013 11 29
MD5:
7ae691c8174956102f28bcd2e58f81bb
Загрузки:
1645