Anritsu Site Master S251A Analyzer
Производитель:
Модель:
Site Master S251A
Дата:
1998
Категория:
Группа:
Описание:
Antenna and Cable Analyzer

Информация

The Site Master (Figure 1-1) is a hand held S21 (transmission gain or loss), SWR/RL (standing wave ratio/return loss), and Distance-To-Fault (DTF) measurement instrument that includes a built-in synthesized signal source and an optional power monitor. It uses a keypad to enter data and a liquid crystal display (LCD) to provide a graphical indication of S21, SWR, or RL over the selected frequency range. The Site Master has a built-in distance-to-fault (DTF) capability. It is capable of up to two hours of continuous operation from a fully charged internal battery and can be operated from a 12.5 dc source (which will also simultaneously charge the battery). Built-in energy conservation features can be used to extend battery life over an eight-hour work day. The Site Master is designed for measuring transmission gain/insertion loss, SWR, return loss, or cable insertion loss and locating faulty RF components in antenna systems. Power monitoring and bias tee capabilities are available as options. The displayed trace can be scaled and/or enhanced with settable frequency markers and/or a limit line. A menu option provides for an audible “beep” when the limit value is exceeded. To permit use in low-light environments, the LCD can be backlit using a front panel key.

показать больше

Руководство пользователя
Hасто́льная кни́га тип:
Руководство пользователя
Страницы:
108
Размер:
1.19 Mbytes (1243574 Bytes)
Язык:
english
Пересмотр:
Hасто́льная кни́га ID:
10580-00020
Дата:
1998 01 01
Качество:
Электронный документ, ни сканирование, очень хорошо читается.
Дата загрузки:
2017 10 15
MD5:
2da40b30736f9e753b6d22b7425c13e4
Загрузки:
602

Информация

General Information ... 1-1 Introduction ... 1-1 Description ... 1-1 Standard Accessories ... 1-2 Options ... 1-3 Optional Accessories ... 1-3 Performance Specifications ... 1-5 Preventive Maintenance ... 1-8 Calibration ... 1-9 Annual Verification ... 1-10 Connectors and Controls ... 2-1 Introduction ... 2-1 Test Panel Connectors ... 2-1 Keypad Controls ... 2-2 Soft Keys and Menus ... 2-26 Printing ... 2-27 Printer Switch Settings ... 2-27 Printing a Screen ... 2-28 Symbols ... 2-29 Self Test ... 2-29 Error Codes ... 2-29 Self Test Errors ... 2-29 Range Errors ... 2-29 Replacing the Battery ... 2-29 Using the Soft Carrying Case ... 2-35 Operation ... 3-1 Introduction ... 3-1 Operating Functions ... 3-3 Applying Power . . . . . . . . . . . . . . . . . . . . 3-3 Setting Options . . . . . . . . . . . . . . . . . . . . . 3-3 Setting Markers . . . . . . . . . . . . . . . . . . . . 3-3 Setting Scale/Limits . . . . . . . . . . . . . . . . . . 3-4 Return Loss (SWR) and Cable Loss (One Port) Measurement ... 3-5 Required Equipment ... 3-5 Device-Under-Test Specification ... 3-5 Procedure ... 3-5 Selecting the Measurement Mode ... 3-5 Selecting the Frequency Range ... 3-7 Performing a Calibration ... 3-7 Cable Return Loss Measurement ... 3-9 Setting the Limit Line ... 3-9 Setting the Markers ... 3-9 Saving Display to Memory ... 3-11 Cable Loss Measurement ... 3-11 Scaling the Display ... 3-11 Saving Display to Memory ... 3-12 DTF Measurement ... 3-13 Required Equipment ... . . . . 3-13 Device-Under-Test Specification ... . . . . 3-13 Procedure ... . . . . 3-13 DTF Parameters Setup ... . . . . 3-13 Performing a Calibration ... . . . . 3-15 DTF Measurement (Determining the Length of the Cable) ... 3-16 DTF Measurement (Determining the Quality of the Cable) ... 3-18 Insertion Gain (Amplifier) Measurement . 3-20 Required Equipment ... 3-20 Device-Under-Test Specification . . . . . . . . . . . 3-20 Procedure ... . . . . . . . . . . . 3-20 Insertion Gain Mode Selection . . . . . . . . . . . . 3-20 Selecting the Frequency Range . . . . . . . . . . . 3-21 Performing a Calibration ... . . . . . . . . . . . 3-21 Amplifier Gain Measurement . . . . . . . . . . . . 3-24 Setting the Markers ... . . . . . . . . . . . 3-24 Activating the Bias Tee ... . . . . . . . . . . . 3-27 Scaling the Display ... . . . . . . . . . . . 3-28 Making Power Measurements ... 3-29 Entering Power Monitor Mode . . . . . . . . . . . 3-29 Zeroing the Power Monitor ... . . . . . . . . . 3-29 Measuring High Input Power Levels . . . . . . . . 3-29 Displaying Power in dBm and Watts . . . . . . . . 3-30 Displaying Relative Power ... . . . . . . . . . 3-30 RF Source Operation ... 3-31 Generating a CW Frequency ... 3-31 Software Tools Program ... 4-1 Description ... 4-1 Requirements ... 4-1 Communication Port Setting ... 4-2 Changing COM Port Settings–Windows 3.1 ... 4-2 Changing COM Port Settings–Windows 95 ... 4-4 Software Installation ... 4-6 Plot Capture ... 4-8 Capture multiple to database ... 4-8 Capture multiple traces to PC screen ... 4-9 Single trace capture ... 4-10 Program Operation ... . . . . 4-11 Fault Location Software ... . . . . 4-11 Smith Chart Software ... . . . . 4-12 Saving a Plot as a Windows Metafile. . . . 4-12 Saving Data to a Spreadsheet. . . . . . . . 4-13 Saving Data to a Database . . . . . . . . . 4-13 “Drag-n-Drop” ... . . . . . . . . 4-14 Printing ... . . . . . . . . 4-14 Appendix A Reference Data ... A-1 Description ... A-1

показать больше