IFR FM/AM-1600CSA Communications Service Monitor
Производитель:
Изображение 1 из 1
Если у вас есть другие фотографии или руководства для
IFR FM/AM-1600CSA, вы можете загрузить файлы в здесь .
Модель:
FM/AM-1600CSA
Дата:
1991
Категория:
Группа:
Описание:
DUAL MODE CELLULAR SYSTEM ANALYZER
Информация
The FM/AM-1600S is a microprocessor controlled, digitally
synthesized communication service monitor which combines the
operations of many different test instruments into a single,
compact unit. Functions the FM/AM-1600S is capable of
performing include:
RF Generator Duplex
Spectrum Analyzer DMM
Distortion Meter Audio Frequency Meter RF Power Meter Signal
Strength Meter Phase Meter Tracking Generator Digital Radio
Paging Encode and Decode
Receiver AF Generator Oscilloscope Deviation (Peak) Meter
SINAD Meter Frequency Error Meter Modulation Meter Bit Error
Rate Meter Deviation (RMS) Meter Cable Fault Detector Analog
Radio Paging Encode and Decode
The FM/AM-1600S utilizes an alphanumeric keypad, dedicated
function keys, multitask Soft Function Keys and a
high-resolution color CRT to display, enter and edit
functions and data. Testing with this instrument can be done
remotely or manually. The FM/AM-1600S can perform tests from
pre-programmed setups or formats determined at the time of
the test.
Microprocessor controlled memory allows storage and recall
of parameters for each of the testing modes as well as
storage and recall of Oscilloscope and Spectrum Analyzer
traces for signal comparison.
The FM/AM-1600S is capable of generating modulated or
unmodulated carrier signals from 250 kHz to 999.9999 MHz (in
100 Hz steps). The output level is variable from -137 dBm to
0 dBm. Modulation types include AM, FM and PM. Modulation
can also be applied from an external source. The RF
Generator also functions as a tracking generator for swept
measurements or as an offset generator in Duplex Mode.
Metering functions available for this operation mode include
SINAD, DMM, Distortion and Audio Frequency Level meters. The
Oscilloscope and Spectrum Analyzer are also available for
use on the RF Generator Operation Screen.
1-3 Receiver
The FM/AM-1600S is capable of receiving modulated and
unmodulated signals from 250 kHz to 999.9999 MHz (in 100 Hz
steps). The FM/AM-1600S receives AM, FM, PM, and SSB
modulated signals. Metering functions in the FM/AM-1600S
available with the Receiver include RF Power, Modulation,
Deviation, Distortion, Frequency Error, AF Frequency, Signal
Strength and SINAD meters and counters. The Oscilloscope and
Spectrum Analyzer are also available for use on the Receiver
Operation Screen. The FM/AM-1600S Receiver is capable of
executing user defined frequency scan operations as well as
single frequency operations. The Receiver accesses "off the
air" signals through the Antenna IN Connector or higher
powered signals are accessed through the T/R Connector.
Hасто́льная кни́га тип:
Руководство пользователя
Страницы:
684
Размер:
24.33 Mbytes (25507508 Bytes)
Язык:
english
Пересмотр:
Hасто́льная кни́га ID:
1002-8601-300
Дата:
Качество:
Отсканированы документу, все читается.
Дата загрузки:
2015 05 23
MD5:
0065a3e54b0a31defa82f1863577e15d
Загрузки:
1664
Информация
TMAC USERS MANUAL
This Manual contains instructions for remotely operating the
FM/AM-1600S Communication Service Monitor and FM/AM-1600CSA
Dual Mode Cellular System Analyzer. The instruction level is
relatively basic and presupposes no previous experience on
the part of the operator with remote operation of a
communication service monitor or cellular system analyzer. A
basic understanding of communication electronics and
cellular system formats is helpful. It is strongly
recommended that the operator be thoroughly familiar with
this manual as well as the Operation Manuals of the Test
Sets before attempting to operate the Test Sets remotely.
ORGANIZATION
The FM/AM-1600S
FM/AM-1600CSA TMAC Users Manual is composed
of the following sections:
SECTION 1 - INTRODUCTION
Provides an introduction to the TMAC language.
SECTION 2 - REMOTE CONFIGURATION
Provides step-by-step procedures for configuring the
FM/AM-1600S or FM/AM-1600CSA for various remote operations.
SECTION 3 - GENERAL TMAC (TEST MACRO LANGUAGE)
Describes and explains the various features of the General
TMAC language.
SECTION 4 - 1600S SPECIFIC TMAC COMMANDS
Lists and details the Specific TMAC commands for the
FM/AM-1600S. Commands are arranged by Operation Mode for
convenience.
SECTION 5 - CSA QUICK REFERENCE LIST
Briefly lists the FM/AM-1600S TMAC commands in alphabetical
order.
SECTION 6 - CREATING AND LOADING CSA SPECIFIC PROGRAMS
Provides step-by-step procedures and examples for creating
and loading CSA specific programs.
SECTION 7 - CSA SPECIFIC TMAC COMMANDS
Lists and details the Specific TMAC commands for the
FM/AM-1600CSA.
Commands are arranged by Operation Mode for convenience.
SECTION 8 - 1600S QUICK REFERENCE LIST
Briefly lists the FM/AM-1600CSA TMAC commands in
alphabetical order.
SECTION 9 - CSA PROGRAM EXAMPLES
Provides functional CSA program examples.