Информация по оборудованию:

Taylor Electrical Instruments Windsor Model 66A Генератор
Производитель:
Taylor Electrical Instruments
Модель: Windsor Model 66A
Дата:
Категория: Измерительная техника
Группа: Генератор
Описание: R.F. Signal generator
Информация:
                                    This instrument is a general purpose R.F. Signal Generator
of advanced design. It covers a very wide frequency range
and is suitable for professional work on both radio and
television receivers. Special attention has been paid to
attenuation, and the unwanted external radiation is
extremely low, due to the efficient double screening and
careful filtration.
The R.F. oscillator uses a triode in a Hartley circuit on
the first 5 ranges but on the 6th range this becomes a
Colpitts oscillator. Low impedance pickup coils are loosely
coupled to the oscillator coils. Owing to the loose coupling
and the fact that these coils are separately switched there
is negligible frequency shift when the attenuator setting is
altered. Modulation at 400 cycles to a depth of 30 per cent,
is effected by another triode Hartley oscillator.

Эти руководства доступны для вышеуказанного оборудования:

Руководство Тип: Обслуживание и Руководство пользователя Taylor-6082-Manual-Page-1-Picture
Страницы: 11
Размер: 350.91 Kbytes (359328 Bytes)
Язык: английский
Редакция:
Manual-ID/Number:
Дата:
Качество: Отсканированы документу, все читается.
Дата публикации:
MD5: 6eb8bcd10fa6433cb5ad43f2b48a0a98
Скачиваний: 183 начиная с 25 Май 2014
Информация:
CIRCUIT DIAGRAM
....................................................
............... 2
1. DESCRIPTION.
1/1. General ... ... ... ............... ... ... 4
1/2. Controls ... ........................................
............... 4
1/3. Frequency Ranges ...............
........................................4
1/4. Terminating Unit ... ... ... ... ... ... 5
1/5. Output Voltage ... ... ... ... ... ... 5
2. OPERATION.
2/1. Mains Adjustment ... ... ............... ... ... 5
2/2. Connection to Receiver ... ... ... ... ... 6
,p-
3. APPLICATIONS.
3/1. General ............... ... ... ... ... ... 7
3/2. Alignment and Ganging ... ... ... ... ... 7
3/3. Sensitivity Measurements ... ... ............... ... 8
3/4. Selectivity Measurements ... ... ... ............... 8
4. SERVICE.
4/1. Valve Replacement ... ... ... ... , ............... 9
APPENDIX—Wavelength/Frequency Conversion Chart ...............10
GUARANTEE
..........................................................................................11
Taylor-6082-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics