Anritsu MH680B Генератор
Производитель:
Фотография недоступна!
Может быть, вы можете загрузить фотографию для
Anritsu MH680B ?
Если у вас есть другие руководства для
Anritsu MH680B, вы можете загрузить файлы в здесь .
Модель:
MH680B
Дата:
1985
Категория:
Группа:
Описание:
Tracking Generator
Информация
The MH680B Tracking Generator is used in conjunction with
the MS61 OB Spectrum Analyzer as a wideband sweep signal
Generator which measures amplitude vs. frequency response by
direct observation. The output frequency of the MH680B when
used with the MS610B can be set in the range from 100 kHz to
2 GHz by using the MS61OB frequency dial.
The output level of the MH680B can be varied continuously in
the range from -10 to 0 dBm.
The MH680B
with the MS610B
can be used to measure the
frequency response of filters, amplifiers, and attenuators.
The device under measurement can be adjusted while directly
observing the characteristics on the MS610B CRT display.
Also the MH680B with the MS610B and a frequency Counter, can
be used to measure the accurate frequency and frequency
response.
Impedance can be measured by direct observation using a
directional coupler or a reflection bridge.
Hасто́льная кни́га тип:
Обслуживание и Руководство пользователя
Страницы:
74
Размер:
1.28 Mbytes (1339609 Bytes)
Язык:
english
Пересмотр:
Hасто́льная кни́га ID:
Дата:
Качество:
Отсканированы документу, все читается.
Дата загрузки:
2014 05 02
MD5:
db6e193c7581c4b5701f893c381d513a
Загрузки:
1006
Информация
SECTION 1 GENERAL
... 1-1
SECTION 2 COMPONENTS AND SPECIFICATIONS
... 2-1
2.1 Components
... 2-1
2.2 Specifications
... 2-1
SECTION 3 OPERATION .
... 3-1
3.1 Precautions
... 3-1
3.1.1 Power supply
... 3-1
3.1.2 Environmental conditions of
installation site
... 3-2
3.1.3 Maximum input level
... 3-2
3.2 Explanation of Controls
... 3-3
3.3 Measurement
... 3-5
3.3.1 Measurement Preparations
... 3-5
3.3.2 Measurement Precautions
... 3-8
3.3.3 Measurement
... 3-10
(1) Amplifier measurement
... 3-10
(2) Measurement with improved
frequency accuracy
... 3-11
(3) Filter measurement
... 3-16
(4) Impedance measurement
... 3-19
SECTION 4 PRINCIPLES OF OPERATION ... • 4-1
SECTION 5 PERFORMANCE TEST
5.1 Introduction
... 5-1
5.2 Equipment Required for Performance Test ... 5-2
5.3 Preliminary Operations
... 5-2
5.4 Performance Test
... 5-2
5.4.1 Frequency range
... 5-3
5.4.2 Output level range
... 5-4
5.4.3 Output level flatness
... 5-5
5.4.4 ower consumption
... 5-6
SECTION 6 CIRCUIT DIAGRAM
... 6-1
SECTION 7 REPLACEABLE PARTS
7.1 Introduction
... 7-1
7.2 Ordering Information
... 7-1
7.3 Reading Capacitance/Resistance ... 7-4
7.4 Semiconductor Markings
... 7-6
7.5 Parts List
... 7-7