Keithley 485 Multímetro digital
Fabricante:
Modelo:
485
Data:
1984
Categoria:
Grupo:
Descrição:
Autoranging Picoammeter

Informação

The model 485 Autoranging Picoammeter provides 100fA sensitivity with 41⁄2-digit resolution in a low-cost, highly sensitive, easy-to-use instrument. The 485 measures DC current on seven ranges covering 10 decades from 100fA to 2mA. The input can withstand overloads as high as 1000V (with 100kΩ limiting resistor) for flexibility in a wide range of applications in test, research, and student labs. An analog output linearly converts the incoming current to voltage for hard copy output or control loop applications. In addition to 100fA sensitivity, the 485 has both excellent accuracy and low voltage burden. One-year accuracy on the most sensitive range is an impressive 0.4%. The 485’s input voltage drop (burden) is actively constrained by feedback techniques to less than 200μV. Thus the 485 makes high accuracy current measurements even in circuits with very low source voltages. The 485 has several features that facilitate measuring low current. In the autorange mode, the 485 maximizes resolution. The REL button makes readings relative to the baseline (the reading prior to touching the button). The LOG button converts the display to the logarithm (base 10) of the absolute value of the measured current. Digital calibration is performed from the front panel or over the bus. A 100-point data store buffer collects and stores measurements at one of six automatic reading rates from three per second to one per hour, or manually with the STORE button. Minimum and maximum readings are continuously updated at three per second in the data store mode. The addition of the Model 4853 IEEE-488 Interface to the 485 provides fully programmable computer control. For isolation from the power line or for portability, the 485 can be battery powered with the Model 1758 Rechargeable Battery Pack

mostrar mais

Manual do Usuário
Tipo de manual:
Manual do Usuário
Páginas:
32
Tamanho:
924.04 Kbytes (946212 Bytes)
Idioma:
english
Revisão:
ID de manual:
485-903-01 A
Data:
1984 01 01
Qualidade:
Scaned documento, todas legível.
Data de upload:
2018 08 23
MD5:
35110aa68af83dd5a5d1923862620c60
Downloads:
469

Informação

This reference and programming guide contains condensed specifications and information which describes the various features of the model 485. Each feature is described in three segments of information. The first segment describes the features. The second segment gives an exact procedure on how to use the feature. The third segment gives application examples. These segments are brief, but the information presented in this format is designed for a quick reference of the model 485 features and functions. Refer to the model 485 Instruction Manual for complete information and essential safety information.

mostrar mais

folha de dados
Tipo de manual:
folha de dados
Páginas:
2
Tamanho:
82.64 Kbytes (84625 Bytes)
Idioma:
english
Revisão:
ID de manual:
Data:
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2014 03 07
MD5:
7d87e2eea7ad66cbc8db7dc34094c6e6
Downloads:
592
Serviço e Manual do Usuário
Tipo de manual:
Serviço e Manual do Usuário
Páginas:
57
Tamanho:
2.70 Mbytes (2826166 Bytes)
Idioma:
english
Revisão:
ID de manual:
Data:
Qualidade:
Scaned documento, todas legível.
Data de upload:
2013 01 13
MD5:
a0be971c50e0cf3bed3b614c26938a4c
Downloads:
887

Informação

This instruction manual contains the necessary information for operating and maintaining the model 485 Autoranging Picoammeter and the Model 1758 Rechargeable Battery Pack. The information is divided into the following sections: Section 1 contains general information and provides guidelines for using this manual. Important safety information is also presented here. Section 2 contains detailed operation information for the model 485. Section 3 contains the information needed to verify the accuracy of the model 485. Performance verification can be done upon receipt of the unit or whenever the basic accuracy is in question. For the more technically oriented, information on theory of operation, maintenance and servicing is contained in Section 4 through 6.

mostrar mais