Orban CAM-1 Effect Processor
Fabricante:
Nenhuma foto disponível!
Talvez você possa carregar uma foto para os
Orban CAM-1 ?
Se você tem outros manuais para os
Orban CAM-1 você pode carregar os arquivos aqui .
Modelo:
CAM-1
Data:
1997
Categoria:
Grupo:
Descrição:
AM Broadcast Processor
Informação
The world’s successful AM broadcast stations all use audio
processing to produce a sound on the air that attracts
listeners. CAM-1 has been designed specifically with this in
mind, to produce improved sound for a wide range of AM
broadcast material.
Orban’s CAM-1 improves the sound quality of AM broadcasting
by providing increased high frequencies and improved Bass.
It can make your station louder, so its coverage will be
increased.
CAM-1 produces a very easy-to-listen-to sound. Your station
will sound better to listeners. Your levels will stay
consistent, so that the listener will not need to change the
volume control on their radio as you change from music to
voice, from one program to another.
CAM-1 works best when connected directly to the Transmitter.
It prevents the Transmitter from over-modulating, taking
over the function of a limiter, but without introducing the
distortions typical of peak limiters.
CAM-1 is easy to install and adjust. The only operating
controls are input and output level. Orban’s engineers spent
hundreds of hours listening and adjusting, to set the
processing’s parameters to work well with all kinds of
program material.
The CAM-1 provides level control, dual-band AGC and
compression, high-frequency boost (AM pre-emphasis) to help
overcome the severe high frequency rolloffs in radios,
bandwidth limiting to 9kHz, and final absolute peak control
to prevent over-modulation by the Transmitter.
CAM-1 Performance Highlights
• Replaces all on-line compressors and limiters.
• Accurately and transparently limits levels without
producing audible artifacts.
• Keeps a consistent loudness on the air with changes in
input level.
• Has very low static and dynamic distortion, thus producing
extremely transparent, natural audio quality.
• Limits its output bandwidth to 9kHz while constraining
overshoots at its output to approximately ldB maximum.
• Accurately indicates processing with a 10-element LED
bargraph array.
• Uses a transformerless, balanced lOkft
instrumentation-amplifier input and a transformerless,
balanced, floating 30ft output to ensure highest
transparency and accurate pulse response.
• Designed to meet all applicable international safety
standards.
• Designed and built in the United States by Orban,
manufacturer of the world-fa-mous OPTIMOD® processors.
Tipo de manual:
Serviço e Manual do Usuário
Páginas:
77
Tamanho:
5.48 Mbytes (5751241 Bytes)
Idioma:
english
Revisão:
ID de manual:
96076-000-01
Data:
1997 01 01
Qualidade:
Scaned documento, todas legível.
Data de upload:
2017 10 26
MD5:
2f85429108e45e9c3f9fa04d70ed8205
Downloads:
449
Informação
1-1 Section 1: Introduction
Orban CAM-1 AM Broadcast Audio Processor
2-1 Section 2: Installation
Installation
Grounding
3-1 Section 3: Operation
CAM-1 Controls and Meters Setting Up the CAM-1 AM Broadcast
Audio Processor Fundamentals of Broadcast Audio Processing
Block Diagram
4-1 Section 4: Maintenance
Routine Maintenance Getting Inside the Chassis Performance
Evaluation, Alignment
5-1 Section 5: Troubleshooting
Problems and Possible Causes Troubleshooting IC Opamps
Technical Support Factory Service Shipping Instructions
6-1 Section 6: Technical Data
Specifications Circuit Description Parts List
Schematics, Assembly Drawings Abbreviations