AKG Akustische und Kinogeräte GmbH BX 25E Alto-falante
Fabricante:
Nenhuma foto disponível!
Talvez você possa carregar uma foto para os
AKG Akustische und Kinogeräte GmbH BX 25E ?
Se você tem outros manuais para os
AKG Akustische und Kinogeräte GmbH BX 25E você pode carregar os arquivos aqui .
Modelo:
BX 25E
Data:
1984
Categoria:
Grupo:
Descrição:
Professional Stereo Reverberation Unit
Informação
This new AKG reverberation system has been improved in many
design aspects but continues on the veil proven and superior
design elements of our well known BX 20,
Special care has been taken in expanding the sound qualities
and at the same time reducing size and weight of our
previous system.
Our patented Torsional Transmission Line (TTL-System) has
been improved by extending the overall length of the system
by about 25 % in relation to the BX 20 system and at the
some time reducing the overall size dramatically to about
one-third.
Besides conventional shelving type frequency controls for
the reverberated output signal, we incorporated o high-cut
filter at the input/reverb drive Amplifier. This feature
will provide the selection between a bright, more aggressive
sound or an alternatively mellower, more natural sound in
reverberation.
Both types of reverberation will be required, depending on
the program material.
The reverb section has been separated from the electronics
and from channel to channel for easy serviceability. Plugin
p.c. boards are used for the electronic circuitry within the
control module. This module may be removed from the main
housing and operated by an optional extension cable up to 10
m (30 ft) away from the reverb section .
The decay time of both channels may be adjusted
independently on the remote control unit, which is included
in the delivery .
Features-
o Genuine two-channel design. Either channel can be used and
control led separate I y .
o Smaller and substantially improved design to well-known BX 20,
o Improved low sensitivity to structure born vibrations .
o Patented circuitry to avoid any direct (dry' signal at the
reverb output.
o Frequency response may be altered both, at input and
output of reverb section .
o Built-in limiter for reverb drive signal with LED
indication on front panel .
o Input and output level adjustable on the connector panel.
o Remote control of reverb time.
o Switchable to mono drive of both channels.
o No locking or re-adjusting when used in OB-vans or on the
road.
o Built-in protection for shipping, which may be easily
removed upon receipt of unit.
Tipo de manual:
Serviço e Manual do Usuário
Páginas:
30
Tamanho:
1.66 Mbytes (1737731 Bytes)
Idioma:
english, german
Revisão:
ID de manual:
Data:
1984 12 01
Qualidade:
Documento Scaned, a leitura parcialmente mal, não parcialmente legível.
Data de upload:
2017 08 20
MD5:
7b77aaed159d13347c9e62f3a4e557d2
Downloads:
505
Informação
1 . General Description
2. Specifications
3. Operating Instructions
3.1 Setup Procedure
3.2 Connections
3.3 Level Adjustment
3.4 How to Connect to Associate Equipment
4. Description of Circuitry
4. I Block Diagram
5. Function Check
6. Instructions for Repair
6.1 Disassembling fhe Unît
6.2 How to Identify Defects
6.3 Alignment Procedure
6.4 Circuit Diagrams and Component Locations
7. Ports List
8. Control Section