Thurlby Thandar Instruments TTI TGR6000 Gerador
Fabricante:
Nenhuma foto disponível!
Talvez você possa carregar uma foto para os
Thurlby Thandar Instruments TTI TGR6000 ?
Se você tem outros manuais para os
Thurlby Thandar Instruments TTI TGR6000 você pode carregar os arquivos aqui .
Modelo:
TGR6000
Data:
2013
Categoria:
Grupo:
Descrição:
Fast Sweep 6GHz RF Signal Generator
Informação
This fast sweep programmable RF Generator provides a
synthesised low noise output over the frequency range 10MHz
to 6000MHz and output level range -110dBm to +7dBm.
The output amplitude and/or frequency can be swept over the
full range of each in a single sweep. The instrument can be
set up to perform two types of sweep. The first sweep type
is a Step Sweep in which the start and stop conditions are
defined, together with the number of points in the sweep,
linear or logarithmic spacing between points, and a dwell
time at each point. The other sweep type is a List Sweep in
which up to 1000 points are defined in a sweep list, with
the frequency, level and dwell time specified for each
point. Both types of sweep can be free run or triggered by a
Sweep Trigger from a variety of sources; in addition, a
Point Trigger can also be defined for each individual step
of the sweep. A rear panel SYNC output signal indicates when
the output is stable, and can be user-programmed to be high
or low.
The output level can be adjusted to correct for external
equipment frequency response using the TRIM function. The
TRIM function consists of a user programmable list of up to
100 amplitude adjustment /frequency pairs. When turned on,
the TRIM function adjusts the output level by an amount
linearly interpolated between the frequencies specified in
the list. The resultant output level is required to remain
within the normal output level limits specified for the
instrument; automatic testing is applied to ensure this and
a warning is issued if the desired output violates this
requirement.
The instrument provides non-volatile storage for up to 12
instrument setups and up to 16 sweep lists.
The instrument is remotely controllable via LAN, USB, RS232
or GPIB, all of which are simultaneously available.
Tipo de manual:
Manual do Usuário
Páginas:
37
Tamanho:
438.45 Kbytes (448970 Bytes)
Idioma:
english
Revisão:
Issue 4
ID de manual:
48591-1240
Data:
2013 01 01
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2017 01 14
MD5:
5eb8405201a3510177e41aa9e42d7d31
Downloads:
466
Informação
Introduction 2
Specification 3
EMC 7
Safety 8
Installation 9
Connections 9
Front Panel Connections 9
Rear Panel Connections 9
Manual Operation 11
General 11
Frequency and Level Setting 13
Step Sweep 13
List Sweep 14
Common Sweep Functions and Attributes 15
Trim 16
Factory Default Settings 17
Utilities 19
Store 19
Recall 19
Edit List Name 19
Set Edit Mode 19
Ref Socket 20
Interfaces 20
Buzzer 20
Power Up Mode 20
Version Info 20
Calibration 20
Remote Interface Operation 21
Address Selection, RS232 Baud Rate and LAN status 21
Remote/Local Operation 21
RS232 Interface 22
USB Interface 23
LAN Interface 23
GPIB Interface 25
Status Reporting 26
Power-on and Remote Operation Default Settings 29
Remote Commands 30
Remote Command Format 30
GPIB Remote Command Format 30
Command List 31
Maintenance 35