Telecommunications Techniques Corporation T-Berd 107 Analyzer
Fabricante:
Nenhuma foto disponível!
Talvez você possa carregar uma foto para os
Telecommunications Techniques Corporation T-Berd 107 ?
Se você tem outros manuais para os
Telecommunications Techniques Corporation T-Berd 107 você pode carregar os arquivos aqui .
Modelo:
T-Berd 107
Data:
1990
Categoria:
Grupo:
Descrição:
Carrier Analyzer
Informação
The T-Berd 107 T-Carrier Analyzer is a hand-held, battery or
AC-operated Test Set for T1 and TIC circuits. Packaged Lq in
a compact case, the T-Berd 107 's operating panel features
test mode selection switches, alarm and signal status LED
indicators, and a liquid crystal display with backlighting
capability. The T-Berd 107 also contains a printer port for
providing hard copy test results.
Two T-Berd 107 options are available: a T1 Channel Monitor
Option and a TI/TIC Transmitter Option. The T1 Channel
Monitor Option provides audio and data monitoring of a
user-selected channel. The TfTC Transmitter Option
provides the ability to transmit framed and unframed test
patterns, as well as loop smart jacks and CSUs. Both options
are field-installable in the T-Berd 107 lid. The T1 Channel
Monitor Option and the T1/T1C Transmitter Option are
discussed in detail in Appendices A and B, respectively.
The T-Berd 107 is designed for use at any T-Carrier access
point, whether at a central office. DSX patch bay, customer
service unit, or a repeater. It monitors T1 or TIC circuits,
verifies error and alarm conditions, measures signal
quality, and identifies equipment failures. The T-BERD 107
can perform both in-service and out-of-service testing, and
can be set for either continuous or timed tests.
The T-Berd 107 offers these key features and characteristics:
• Automatic synchronization to D4. ESF. and SLC*-96 framing
patterns.
• Automatic recognition of and synchronization to the
quasirandom signal source (QRSS), the 3 IN 24, 1:7. and ALL
ONES patterns.
• Extended Receiver Range that allows testing of T1 signals
at any point along a span line, including low-level signals
(down to -35 dB) at repeater inputs.
• An optional T1/T1C Transmitter for performing out-of
service testing.
• Printer port and buffer for storing and printing hard copy
test results.
• An optional T1 Channel Monitor to test individual DSO
channels within the T1 frame.
• Signal analysis with signal level and recovered clock
frequency measurements.
Tipo de manual:
Manual do Usuário
Páginas:
96
Tamanho:
2.64 Mbytes (2766076 Bytes)
Idioma:
english
Revisão:
A
ID de manual:
ML11086-02
Data:
1990 09 01
Qualidade:
Scaned documento, todas legível.
Data de upload:
2017 01 10
MD5:
d65a904dc029f891003b58420f188e5d
Downloads:
512
Informação
1.0 GENERAL INFORMATION ... 1-1
1.1
INTRODUCTION ... 1-1
1.2 INSTRUMENT
OVERVIEW ... 1-1
1.3 SUMMARY OF KEY FEATURES ... 1-2
2.0 PHYSICAL DESCRIPTION
... 2-1
2.1
INTRODUCTION ... 2-1
2.2
DESCRIPTION,, ...
2-1
2.3 Power supply
... 2-2
3.0 FUNCTIONAL DESCRIPTION
... 3-1
3.1
INTRODUCTION ... 3-1
3.2 OPERATING MODES ... 3-1
3.3 INSTRUMENT PANEL
... 3-1
3.4
MEASUREMENTS ... 3-11
3.5 PRINTER PORT AND BUFFER ... 3-16
3.6 HELP
PANEL ... 3-19
4.0 PREPARATION FOR USE
... 4-1
4.1
INTRODUCTION ... 4-1
4.2
UNPACKING ... 4-1
4.3 EQUIPMENT SUPPLIED
... 4-1
4.4 INSTRUMENT CHECKOUT
... 4-2
5.0
OPERATION ... 5-1
5.1
INTRODUCTION ... 5-1
5.2 PERFORMING A TEST AT THE REPEATER ... 5-1
5.3 PERFORMING A 15-MINUTE TIMED TEST . 5-5
5.4 PERFORMING A SIGNAL LEVEL
MEASUREMENT TEST ... 5-9
5.5 PERFORMING A T1C TEST ... 5-11
5.6 TESTING INDIVIDUAL DS0 CHANNELS ... 5-13
5.7 PERFORMING AN OUT-OF SERVICE ...
LOOPBACK TEST ON A T1 CIRCUIT ... 5-16
5.8 PERFORMING AN SLC-96 OUT-OF-SERVICE
TEST ... 5-21
5.9 PERFORMING A LOSS TEST ON A NEW
T1 CABLE SECTION ... 5-25
6.0 MAINTENANCE AND SERVICE ... 6-1
6.2
MAINTENANCE ... 6-1
6.3 SERVICE
... 6-5
7.0
SPECIFICATIONS ... 7-1
7.1
INTRODUCTION ... 7-1
7.2 PHYSICAL CHARACTERISTICS ... 7-1
7.3 OPERATIONAL REQUIREMENTS ... 7-1
7.4 INPUT
SPECIFICATIONS ... 7-1
7.5 FREQUENCY MEASUREMENT ... 7-2
7.6 LEVEL
MEASUREMENT ... 7-2
7.7
SWITCHES ... 7-3
7.8
INDICATORS ... 7-4
7.9 ALARM
CRITERIA ... 7-4
7.10 PRINTER AND PRINTER CABLE
SPECIFICATIONS
... 7-5
8.0 OPTIONS AND Accessories ... 8-1
8.1
INTRODUCTION ... 8-1
8.2
OPTIONS ... 8-1
8.3 Accessories
... 8-1
APPENDICES
A. T1 CHANNEL MONITOR OPTION ... A-1
8. T1/T1C TRANSMITTER OPTION ...