Informações sobre o equipamento:

Fluke 8024A Multímetro digital
Fabricante:
Fluke
Modelo: 8024A
Data: 1980
Categoria: Instrumentos de medição
Grupo: Multímetro digital
Descrição: pocket-size digital multimeter
Informações:
                                    Your John Fluke Model 8024A is a pocket-sized digital
multimeter that is ideally suited for application in the
field, laboratory, shop, or home. Some of the features of
your instrument are:
FUNCTIONS: All standard VOM measurement functions — ac/dc
voltage, ac/dc current, resistance — plus:
Conductance: A new multimeter function that allows fast,
accurate, noise-free resistance measurements up to 10,000 ΜΩ.
Temperature: Used with a K-type thermocouple, this function
provides direct display in degrees Celsius for K-type
thermocouples.
Peak-Hold: Provides short-term memory for capturing the peak
value of transient ac or dc signals such as motor starting
current.
Continuity: Provides an immediate visual and audible
indication when continuity is detected (use for passive
circuit testing).
Level Detector: Senses logic levels and other active signals
less than 250V dc or ac rms. Visual and audible indications
of the results are provided.
RANGE for each function has:
Full autopolarity
Overrange indication
Effective protection from overloads.
Dual slope integration measurement technique to ensure
noise-free measurements.

Esses manuais estão disponíveis para o equipamento acima:

Fluke -- 8024A -- Serviço e Manual do Usuário
O nome do arquivo: Fluke-7616-Manual-Page-1-Picture
Tipo manual: Serviço e Manual do Usuário
Páginas: 117
Tamanho: 6.25 Mbytes (6556432 Bytes)
Idioma: Inglês
Revisão:
Manual-ID/Number:
Data: Agosto 1980
Qualidade: Scaned documento, todas legível.
Envie data:
MD5: 40624afabbe449fc38ed9bbe32bb82db
ed2kID: 2e17267938b4241b11c5b3ddb08d4087
Downloads: 54 desde 27 Janeiro 2016
Informações:
1 INTRODUCTION AND
SPECIFICATIONS..................................................1-1
l-l. INTRODUCTION l-l
1-3.
SPECIFICATIONS.........................................................................I-2
2 OPERATING INSTRUCTIONS.......
..........................................................2-1
2-1.
INTRODUCTION........................................................................2-1
2-3. PREPARING FOR OPERATION.....................2-1
2-4. Unpacking 2-1
2-7. Battery or Fuse Installation/
Replacement................2-1
2-9. PHYSICAL FEATURES 2-3
2-11. OPERATING NOTES 2-3
2-13. Input Overload Protection 2-3
2-15. Input Connection to COMMON.......................2-7
2-17. Fuse
Check.............................................................................2-7
2-19. Fuse Replacement 2-7
2-21. The Display «...2-7
2-26.
OPERATION...............................................................................2-9
2-28. AC/ DC Volts (V) Operation 2-9
2-30. AC/ DC Current (mA) Operation.......................2-9
2-32. Resistance (kfl) Operation 2-9
2-34. Continuity Testing 2-9
2-36. Diode Testing 2-13
2-38. Conductance (nS) Operation 2-13
2-40. Temperature (°C) Operation 2-13
2-43. Level Detector Operation 2-16
2-45. Peak Hold Operation 2-17
2-47. INITIAL CHECK-OUT PROCEDURE...............2-19
2-49. MEASUREMENT TECHNIQUES...................2-21
2-51. Temperature Conversion 2-21
2-53. Conductance-to-Resistance Conversion................2-24
2-55. AC Measurements ...........................2-24
2-57. AC/ DC/ Voltage Measurements....................2-24
2-60. AC/DC Current Measurements............*.......2-24
2-64. Resistance Measurements 2-29
2-67. APPLICATIONS ...........................2-29
2-69. Thermocouples ...............2-30
2-75. Leakage
Tester...........................................................................2-30
3 THEORY OF
OPERATION.............................................................................3-1
3-1.
INTRODUCTION..........................................................................3-1
3-3. OVERALL FUNCTIONAL DESCRIPTION..............3-1
3-5. A/D
Converter.............................>.........................................3-1
3-14. Voltage Measurement Function ........................3-6
3-16. Current Measurement Function........................3-6
3-18. Temperature (°Q Measurement Function................3-6
3-20. Resistance Measurement Function.....................3-6
3-23.
Conductance Measurement Function...........................
.........3-11
3t25.
Peak Hold Circuit
Level...............................................
.........3-11
3-27.
Level Detector
Circuit...................................................
.........3-11
MAINTENANCE..............................................................
........
........4-1
4-1.
INTRODUCTION..............................................................
...........4-1
4-3.
SERVICE INFORMATION.............................................
...........4-1
4-7.
GENERAL INFORMATION............................................
..........4-3
4-8.
Access
Information.......................................................
...........4-3
4-13.
Display
Access..............................................................
...........4-4
4-17.
Cleaning......................................................................
...........4-5
4-19.
Battery/Backup Fuse Replacement...............................
4-21.
PERFORMANCE
TEST...................................................
...........4-6
4-23.
Initial
Procedure..............................................i.......
...........4-6
4-25.
Display
Test...............................................................
4-27.
Voltage
Test...................................i............................
4-29.
Current Test......
V..................................................
...........4-8
4-31.
Resistance/Conductance Test
......................................
...........4-8
4-33.
Peak Hold
Test...........................................................
...........4-9
4-35.
Continuity
Test......................;....................................
.........4-11
4-37.
Level Detector
Test....................................................
.........4-11
4-39.
BT
Test......................................................................
4-41.
Temperature
Test.........................................................
.........4-13
4-43.
CALIBRATION ADJUSTMENTS.................................
.........4-14
4-46.
TROUBLESHOOTING...................................................
.........4-15
LIST OF REPLACEABLE PARTS
.............................................
......5-1
5-1.
INTRODUCTION..............................................................
...........5-1
5-4.
HOW TO OBTAIN PARTS
.............................................
...........5-2
ACCESSORIES INFORMATION........
.................................
.........6-1
6-1.
INTRODUCTION...............................................................
--------6-1
6-3.
DELUXE CARRYING CASE (C90).................................
...........6-I
6-5.
RUGGED CARRYING CASE (Y8105)...............................
...........6-1
6-7.
TYPE K SHEATHED THERMOCOUPLE (Y8102)...........
...........6-1
6-8.
Introduction.....................................................................
...........6-1
6-10.
Specifications
...................................................................
.......6-4
6-11.
TYPE K BEAD THERMOCOUPLE (Y8103)....................
...........6-4
6-12.
Introduction....................................................................
6-14.
Specifications...................................................................
6-15.
THERMOCOUPLE TERMINATION (Y8I04).................
...........6-5
6-16.
6-18.
6-19.
TEMPERATURE PROBES (80T-I50C and 80T-150F)
_______6-5
6-20.
Introduction................................................................
6-22.
Specifications...................................................................
_______6-5
6-23.
HIGH VOLTAGE PROBE (80K-40)..................................
...........6-6
6-24.
Introduction...................................................................,
6-26.
Specifications.................................................................
...........6-6
6-27.
HIGH FREQUENCY PROBE (81RF).................................
_______6-6
6-28.
Introduction.....................................................................
_______6-6
6-30.
Specifications
...................................................................
.......6-6
6-31.
HIGH FREQUENCY PROBE (82RF).................................
...........6-7
6-32.
Introduction..............................................
..................
.......6-7
6-35.
Specifications
...................................................................
...........6-7
6-36.
CURRENT TRANSFORMER (801-600).............................
_______6-7
6-37.
Introduction.....................................................................
...........6-7
6-39.
Specifications...................................................................
...........6-8
6-40.
CURRENT SHUNT
(80J-10)...............................................
...........6-8
6-41.
Introduction................................................................................6-8
6-43.
Specifications..............................................................................6-8
6-44. BATTERY ELIMINATOR
(A81)...................................................6-8
6-46. AC/DC CURRENT PROBE (Y8100)
..........................................6-9
6-47.
Introduction..............................................................................6-9
6-49.
Specifications..............................................................................6-9
6-50. AC CURRENT TRANSFORMER
(Y810I)...................................6-9
6-51.
Introduction...............................................................................6-9
6-53.
Specifications............................................................................6-10
6-59. SAFETY DESIGNED TEST LEAD SET
(Y8I32)......................6-10
6-56. DELUXE TEST LEAD SET
(Y8134)............................................6-10
6-57.
Introduction..............................................................................6-10
6-59. SLIM FLEX TEST LEAD SET
(Y8I40)................................... .6-10
6-60.
Introduction..............................................................................6-10
7 SCHEMATIC
DIAGRAMS....................................................................7-1
APPENDIX
A......................................................................................A-1
Fluke-7616-Manual-Page-1-Picture
Iniciar Download


Comentários

Sem comentários.

Adicionar Comentário

* Informação requerida
(não será publicado)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Type the numbers for four hundred seventy-two.
 
Digite a resposta:
 
Notifique-me de novos comentários via email.
 
Lembrar minhas informações neste computador.
 
 
Powered by Commentics