Informações sobre o equipamento:

Wavetek 1801A Gerador
Fabricante:
Wavetek
Modelo: 1801A
Data:
Categoria: Instrumentos de medição
Grupo: Gerador
Descrição: SWEEP/SIGNAL GENERATOR
Informações:
                                    The Wavetek Model 1801A Sweep/Signal Generator provides
features and options ideally suited for the manufacturer,
installers, and operators of CATV systems.
The frequency range of from 1 to 500 MHz, or,with the high
band, of from 1 to 950 MHz, adequately covers the frequency
bands now being used as well as those of „the future. The
instrument will sweep each band in It's entirety, or sweep
width may be continuously reduced to CW operation.
The Ultra flat 75 ohm output system ' is calibrated from
+57dBmV to -33 dBmV* 20dB of the total attenuation is a
continously variable electronic attenuator diode). A three
position reference switch, in parallel with this attenuator,
will increase or decrease the output by +0.5dB. (An internal
calibration allows the reference to be set at any level fro^
+0dB to +0.5dB). This greatly aids in flatness measurements
by providing an accurate rapid calibration
reference.
Other features include Built-In RF Detector, External
Leveling Circuitry, and a complete Crystal-Controlled Birdy
Marker System which may be used to internally modulate the
RF signal. A selection of marker widths for wide band or
narrow band operation is also provided.
The instrument will sweep at Line frequency, 60 Hz, or as
slow as 1 sweep in 100 seconds. A special sweep rate
position facilitates faster testing of operating CATV
systems with minimum subscriber interference. The sweep time
of this position is adjustable from 1 to 10 milliseconds and
the repetition rate is adjustable from 1 to 10 seconds.
The Model 1801A uses modular construction for ease of
maintenance and modifications. All standard options , can be
either factory or field installed.
The small, compact, all solid-state instrument is 5-1/4" X
8" X 13” and weighs only 20 pounds.

Estes manuais estão disponíveis para os equipamentos acima:

Wavetek -- 1801A -- folha de dados
O nome do arquivo: Wavetek-6422-Manual-Page-1-Picture
Tipo manual: folha de dados
Páginas: 5
Tamanho: 418.65 Kbytes (428697 Bytes)
Idioma: Inglês
Revisão:
Manual-ID/Number:
Data:
Qualidade: Scaned documento, todas legível.
Envie data:
MD5: ff7d5e1a0f748288897775a4e4087d12
Downloads: 102 desde 19 Novembro 2014
Informações:
Wavetek-6422-Manual-Page-1-Picture
Iniciar Download grátis


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the word hand backwards.
Powered by Commentics