Thurlby Thandar Instruments TTI CPX200 Wzmacniacz
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Thurlby Thandar Instruments TTI CPX200 ?
Jeśli masz jakieś inne podręczniki dla
Thurlby Thandar Instruments TTI CPX200, możesz przesłać pliki tutaj .
Model:
CPX200
Data:
2013
Kategoria:
Grupa:
Opis:
Dual 35V 10A Power Flex Power Supply
Informacja
Voltage Range:
0V to 35V
Current Range:
0A to 10A
Power Range:
Up to 175W
Output Voltage Setting:
By coarse and fine controls.
Output Current Setting:
By single logarithmic control.
Operating Mode:
Constant voltage or constant current with automatic
cross-over provided that the power demanded stays within the
power envelope, see graph. Outside of this envelope the
output becomes unregulated.
Output Switch:
Electronic. Preset voltage and current displayed when off.
Output Terminals:
Universal 4mm safety binding posts on 19mm (0·75”) pitch.
Sensing:
Switchable between local and remote. Spring-loaded push
terminals for remote connection.
Output Protection:
Forward protection by Over-Voltage Protection (OVP) trip;
maximum voltage that should be applied to the terminals is
50V. Reverse protection by diode clamp for reverse currents
up to 3A.
OVP Range:
10% to 110% of maximum output voltage set by front panel
screwdriver adjustment.
Line Regulation:
<0.01% of maximum output for a 10% line change.
Load Regulation:
<0.05% of maximum output for a 90% load change, using remote
sense.
Ripple & Noise (20MHz bandwidth):
5mVrms max; typically <2mVrms, <20mV pk-pk, both outputs
fully loaded (7A @ 25V), constant voltage mode.
Transient Load Response:
<2ms to within 100mV of set level for a 5% to 95% load change.
Temperature Coefficient:
Typically <100ppm/°C
Status Indication:
Output on lamp. Constant voltage mode lamp. Constant current
mode lamp. Unregulated (power limit) lamp Trip message on
display.
Typ ręczny:
Instrukcja obsługi
Strony:
38
Rozmiar:
259.52 Kbytes (265753 Bytes)
Język:
english, german, french, italian
Rewizja:
Issue 13
Ręczny ID:
48511-0260
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2013 11 03
MD5:
8871ac6635745c20a718020a35c97415
Pobrane:
987
Informacja
Specification 2
Safety 4
EMC 6
Installation 7
Connections 8
Operation 9
Maintenance 11
Instructions en Francais
Sécurité 12
Installation 13
Connexions 14
Opération 15
Maintenance 17
Bedienungsanleitung auf Deutsch
Sicherheit 18
Installation 19
Anschlüsse 20
Betrieb 21
Wartung 24
Istruzioni in Italiano
Sicurezza 25
Installazione 26
Collegamento 27
Funzionamento 28
Manutenzione 30
Instrucciones en Español
Seguridad 31
Instalación 32
Conexiones 33
Funcionamiento 34
Mantenimiento 36
Typ ręczny:
Instrukcja obsługi
Strony:
38
Rozmiar:
575.44 Kbytes (589255 Bytes)
Język:
english, german, french, italian
Rewizja:
Issue 12
Ręczny ID:
48511-0260
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2015 05 08
MD5:
de6dbfc46ad7e33f35ee96b1b27cdde2
Pobrane:
1582
Informacja
Specification 2
Safety 4
EMC 6
Installation 7
Connections 8
Operation 9
Maintenance 11
Instructions en Francais
Sécurité 12
Installation 13
Connexions 14
Opération 15
Maintenance 17
Bedienungsanleitung auf Deutsch
Sicherheit 18
Installation 19
Anschlüsse 20
Betrieb 21
Wartung 24
Istruzioni in Italiano
Sicurezza 25
Installazione 26
Collegamento 27
Funzionamento 28
Manutenzione 30
Instrucciones en Español
Seguridad 31
Instalación 32
Conexiones 33
Funcionamiento 34
Mantenimiento 36