BK Precision 2120 Oscyloskop
Producent:
Zdjęcie 1 z 1 uploaded by: Rick H Parker
Jeśli masz inne zdjęcia lub instrukcje obsługi dla
BK Precision 2120, możesz przesłać pliki tutaj .
Model:
2120
Data:
Kategoria:
Grupa:
Opis:
Dual trace Oscilloscope
Informacja
FEATURES
DUAL TRACE FEATURES
Dual Trace
Model 2120 has two vertical input channels for displaying
two waveforms simultaneously. Selectable single trace
(either CH 1 or CH 2) or dual trace. Alternate or chop sweep
selectable at all sweep rates.
Sum and Difference Capability
Permits algebraic addition or subtraction of channel 1 and
channel 2 waveforms, displayed as a single trace. Useful for
differential voltage and distortion measurements.
CRT FEATURES
Rectangular CRT
Rectangular CRT with large 8 x 10 centimeter viewing area.
Convenience
Trace rotation electrically adjustable from front panel. 0%,
10%, 90%, and 100% markers for rise time measurements.
VERTICAL FEATURES
High Sensitivity
5 mV/div sensitivity for full bandwidth. 1 mV/div
sensitivity with PULL X5 at reduced bandwidth.
Calibrated Voltage Measurements
Accurate voltage measurements (3%) on 10 calibrated ranges
from 5 mV/div to 5 V/ div. Vertical gain fully adjustable
between calibrated ranges.
SWEEP FEATURES
Calibrated Time Measurements
Accurate (±3%) time measurements. Model 2120 has 19
calibrated ranges from 0.5 s/div to 0.5 |is/div. Sweep time
is fully adjustable between calibrated ranges.
X10 Sweep Magnification
Allows closer examination of waveforms, increases maximum
sweep rate to 50 ns/div.
TRIGGERING FEATURES
Two Trigger Modes
Selectable normal (triggered) or automatic sweep modes.
Triggered Sweep
Sweep remains at rest unless adequate trigger signal is
applied. Fully adjustable trigger level and (+) or (-) slope.
AUTO Sweep
Selectable AUTO sweep provides sweep without trigger input,
automatically reverts to triggered sweep operation when
adequate trigger is applied.
Five Trigger Sources
Five trigger source selections, including CH 1, CH 2, ALT,
EXT, and LINE. In ALT mode, each waveform becomes its own
trigger (alternate triggering).
Three Trigger Coupling Choices
Selectable AC, TV H (Line), or TV V (Frame) trigger coupling.
Video Sync
Frame (TV V) or Line (TV H) triggering selectable for
observing composite video waveforms.
OTHER FEATURES
X-Y Operation
Channel 2 can be applied as horizontal deflection (X-axis)
while channel 1 provides vertical deflection (Y-axis).
Built-In Probe Adjust Square Wave
A 0.2 V p-p, 1 kHz square wave Generator permits Probe
compensation adjustment.
Channel 1 Output
A buffered 50Q output of the channel 1 signal is available
at the rear panel for driving a frequency Counter or other
instruments. The output is 50 mV/div into 50Q.
Supplied With Two Probes Low Boy Configuration
Low profile housing saves bench space and allows
Oscilloscope to be carried like a briefcase.
Typ ręczny:
Instrukcja serwisowa
Strony:
12
Rozmiar:
1.75 Mbytes (1837370 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2018 08 05
MD5:
8bc06bdbcbb4a591ca009046f42ec20e
Pobrane:
913
Informacja
Servicing Information
Typ ręczny:
Instrukcja obsługi
Strony:
18
Rozmiar:
891.99 Kbytes (913397 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2018 08 05
MD5:
9de0808c4fba7f7e2a192ad341fc2f0c
Pobrane:
498
Informacja
TEST INSTRUMENT
SAFETY ... inside front cover
FEATURES ... 3
SPECIFICATIONS ... 4
CONTROLS AND INDICATORS ... 6
Vertical Controls ... 6
Horizontal Controls ... 7
Triggering Controls ... 8
Rear Panel Controls ... 8
OPERATING INSTRUCTIONS ... 10
Safety Precautions ... 10
Equipment Protection Precautions ... 10
Operating Tips ... 10
Initial Starting Procedure ... 11
Single Trace Display ... 11
Dual Trace Display ... 12
Triggering ... 12
Page
OPERATING INSTRUCTIONS Cont.)
Magnified Sweep
Operation ... 14
X-Y
Operation ... 14
Video Signal
Observation ... 14
Applications ... 14
MAINTENANCE ... 15
Fuse
Replacement ... 15
Line Voltage
Selection ... 15
Periodic
Adjustments ... 15
Calibration
Check ... 16
Instrument Repair
Service ... 16
APPENDIX
I ... 17
WARRANTY SERVICE INSTRUCTIONS ... 18
LIMITED TWO-YEAR WARRANTY ... 19
“Guidebook to Oscilloscopes”
Ordering Information ... inside back cover