Hewlett Packard 6212B Zasilanie
Producent:
Obraz 1 z 2
Obraz 2 z 2
Jeśli masz inne zdjęcia lub instrukcje obsługi dla
Hewlett Packard 6212B, możesz przesłać pliki tutaj .
Model:
6212B
Data:
1982
Kategoria:
Grupa:
Opis:
DC Power Supply Bench Series
Informacja
DESCRIPTION
1 -2 This Power supply is completely transistorized and
suitable for either bench or relay rack operation. It is a
compact, well-regulated, Constant Voltage/Constant Current
supply that will furnish full rated output voltage at the
maximum rated output current or can be continuously adjusted
throughout the output range. The front panel CURRENT control
can be used to establish the output current limit (overload
or short circuit) when the supply is used as a constant
Voltage Source and the VOLTAGE controls can be used to
establish the voltage limit (ceiling) when the supply is
used as a constant Current source. The supply will
automatically crossover from constant voltage to constant
current operation and vice versa if the output current or
voltage exceeds these preset limits.
1-3 Either the positive or negative output terminal may be
grounded or the Power supply can be operated floating at up
to a maximum of 300 volts off ground.
1-4 A single meter is used to measure either output voltage
or output current in volts of mA. The voltage or current
range is selected by the METER SELECTION switch on the front
panel.
Typ ręczny:
Serwis i User Manual
Strony:
47
Rozmiar:
18.76 Mbytes (19668537 Bytes)
Język:
english
Rewizja:
Ręczny ID:
5950-1928
Data:
1982 11 01
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2017 12 30
MD5:
d4b13aeb269722be12718ac0494e54de
Pobrane:
2248