Hewlett Packard 608A Generator
Producent:
Model:
608A
Data:
1953
Kategoria:
Grupa:
Opis:
VHF Signal Generator

Informacja

The Model 608A Signal Generator is a general purpose laboratory Generator covering the 10 to 500 megacycle band. Both the frequency and output are calibrated. Internal modulation at either of two fixed frequencies is provided. The instrument may also be modulated from external sources of sine waves or pulses. The Model 608A may be used for measuring gains selectivity or image rejection of receivers, IF and broad band amplifiers. The high output voltage (1 volt into a 50 ohms load) of the Generator is suitable for driving bridges, slotted lines, transmission lines, antennas, and Filter networks.

pokaż więcej

Serwis i User Manual
Typ ręczny:
Serwis i User Manual
Strony:
37
Rozmiar:
3.21 Mbytes (3362512 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
1953 01 01
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2017 12 30
MD5:
e770cac87ae69e3d71f4f3a3b5a52da1
Pobrane:
356
Instrukcja serwisowa
Typ ręczny:
Instrukcja serwisowa
Strony:
10
Rozmiar:
1.09 Mbytes (1147842 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, czytając częściowo źle, nie częściowo czytelny.
Data przesłania:
2017 12 30
MD5:
ef8d9c8c6179ca99bc7510c1835fba02
Pobrane:
1977

Informacja

Service Notes This Service Note contains information necessary for replacing and recalibrating the output attenuator in the 608A/B/C/D/E/F Signal Generators. The procedure is described for each model, using the appropriate replacement attenuator. This Service Note outlines the procedure for modifying the Model 608C.D VHF Signal Generators for regulated DC filament operation of the RF circuits. The original multivibrator filament Power supply in Some cases caused ripple on the output RF signal from the generator. The DC filament supply prevents this from happening.

pokaż więcej