Advantest Corporation R5373 Licznik
Producent:
Zdjęcie 1 z 1
Jeśli masz inne zdjęcia lub instrukcje obsługi dla
Advantest Corporation R5373, możesz przesłać pliki tutaj .
Model:
R5373
Data:
Kategoria:
Grupa:
Opis:
Electronic Counter
Informacja
Microwave Frequency Counters
Recent research in communications and broadcast systems
using microwaves in applications such as broadcast satellites,
telephone circuits and the new field of submillimeter microwave
and millimeter-wave communications systems have resulted
in dramatic development in components and practical
product designs. This research and development work requires
highly accurate frequency measurements. Previous
approaches to measure frequencies in these bands involved the
use of frequency converters or converting oscillators. These
methods, however, were difficult to use as it required
troublesome
tuning and calculations to determine the actual frequency.
To solve these problems, ADVANTEST has employed a digital
TRAHET technique to achieve 1 Hz resolution with a gate time
of just one second. It enables not only frequency measurement
but the application of offset to frequency results and
calculation
of standard deviation, ppm, maximum values, minimum
values and other useful parameters. In addition, a digital
comparator has been provided and totalizing and measurements
of the carrier frequency of pulse-modulated signals are
also possible.
Measurements up to the Microwave and Millimeterwave
Bands
Measurement ranges extend from 10 mHz to 18 GHz for the
R5372 and 10 mHz to 27 GHz for the R5373, It enables a single
Counter to be used for broadcast satellite, satellite
communications,
pilot-signal measurements for radio equipment and
many more diverse applications.
Reciprocal Counting Technique for High-Resolution
Measurements
The 10 mHz to 10 MHz mode for the A input uses a reciprocal
technique that calculates the frequency from the period of the
input signal, thereby achieving high resolution in a short
counting time. This enables high-resolution measurements of
the pulse width of pulse-modulated signals and of pulse
repetition frequencies. Making a measurement is as simple as
setting the required measurement resolution; the rest is
automatic
with extremely easy selection of number of displayed
digits, counting time and frequency.
Typ ręczny:
Dane techniczne
Strony:
4
Rozmiar:
57.78 Kbytes (59163 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2017 04 02
MD5:
0c5476b3de0b4f586157034487d6d673
Pobrane:
876
Typ ręczny:
Instrukcja obsługi
Strony:
194
Rozmiar:
4.22 Mbytes (4429185 Bytes)
Język:
english
Rewizja:
First Printing
Ręczny ID:
FOE-8324254D01
Data:
1989 10 25
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2017 04 02
MD5:
bda8112d049391f25cce6e42021451a2
Pobrane:
1299