General Radio Company 1362 Oscillator
Producent:
Model:
1362
Data:
1967
Kategoria:
Grupa:
Opis:
UHF Oscillator

Informacja

The 1362 UHF Oscillator (Figure 1-1) is a general-purpose Oscillator for the radio-frequency laboratory. Covering the calibrated range from 220 to 920 MHz, this Oscillator provides adequate power to drive bridges, slotted lines, impedance comparators, and other measuring equipment. The output is brought through an attenuator, calibrated in relative power levels, making the Oscillator suitable for the testing of receivers. Direct sine-wave, square-wave, or pulse amplitude modulation is possible. Amplitude modulation free from incidental fm can be obtained with an external diode modulator. Connected to a mixer, the Oscillator can be used as the local Oscillator in a heterodyne receiver to convert the GR 1236 I-F Amplifier, or a low-frequency communications receiver, into a detector for uhf signals. Square-wave and pulse amplitude modulation can be obtained with the GR Type 1264 Modulating Power supply (Figure 1-2), or leveled output can be obtained with the GR Type 1263 Amplitude-Regulating Power supply.

pokaż więcej

Serwis i User Manual
Typ ręczny:
Serwis i User Manual
Strony:
28
Rozmiar:
15.42 Mbytes (16170537 Bytes)
Język:
english
Rewizja:
Ręczny ID:
1362-0100 B
Data:
1967 01 01
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2016 12 29
MD5:
74caa15bd4cfcac258bd356f61c30d4b
Pobrane:
671

Informacja

SPECIFICATIONS TABLE OF CONTENTS INTRODUCTION - SECTION 1 INSTALLATION - SECTION 2 OPERATING PROCEDURE - SECTION 3 APPLICATIONS - SECTION 4 PRINCIPLES OF OPERATION - SECTION 5 SERVICE AND MAINTENANCE - SECTION 6

pokaż więcej