Fluke 2289A Interfejs
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Fluke 2289A ?
Jeśli masz jakieś inne podręczniki dla
Fluke 2289A, możesz przesłać pliki tutaj .
Model:
2289A
Data:
0
Kategoria:
Grupa:
Opis:
Informacja
The Fluke Helios I Computer Front End is a highly accurate,
easy-to-use data acquisition and control subsystem that can
be used with any kind of personal or mainframe computer.
The Computer Front End is a medium speed, smart intermediary
between a computer and a real world measurement application.
With capacity ranging from a single channel in a minimal
configuration to 1500 channels in a fully expanded system
(1000 channels if the Scan/Alarm option is installed), the
Front End can be adapted to a wide array of applications.
The Front End gathers data and generates control or stimulus
signals through a standard computer Interface. It combines a
full range of measurement capabilities and is easy to
program. The Front End’s chassis includes:
o An RS-232-C and an RS-422 standard serial Interface port for
communication with a host computer. (Serial printer port
available with Scan/Alarm option.)
o A microcomputer with ROM and RAM to provide local
intelligence.
o Six option slots that accept any of a range of measurement and
control modules. This family of options supports a variety
of both analog and digital inputs and outputs.
Expansion chassis can be added to accommodate more
input/output channels, up to a maximum of 1500 (standard
system) or 1000 (Scan/Alarm option system).
Typ ręczny:
Instrukcja obsługi
Strony:
68
Rozmiar:
1.52 Mbytes (1595280 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2016 02 08
MD5:
3695002257259c55016b4c9bef01df1b
Pobrane:
1101
Informacja
How to Use This Manual
Describes the organization and use of the Service Manual.
Gene al Information
Describes the Front End and its available Accessories and
options. Required test equipment, shipping, and factory
service information are included here.
Theory of Operation
Covers the theory of operation for the Front End mainframe.
Option assembly theory is contained in the individual option
subsections of Sections 8 and 9-Maintenance
General maintenance of the instrument, cleaning instructions
and procedures to gain access to and remove mainframe
assemblies are included here.
5 Testing and Troubleshooting
Consists of mainframe performance tests and troubleshooting
procedures designed to isolate a malfunction to the circuit
board level. Component level troubleshooting may be
performed using the Theory of Operation (Section 3) and
Schematic Diagrams (Section 7).
6 List of Replaceable Parts
Contains parts lists.for the Front End mainframe and gives
parts ordering information. Option assembly parts lists are
in the individual subsections of Sections 8 and 9.
7 Schematic Diagrams
Presents Front End mainframe schematics on foldout pages.
Schematics for option assemblies are located in the
individual option subsections.
8 Options -160 Through -169
Covers Options -160 through -169 in subsections ordered
numerically by option number. Includes theory of operation,
performance test procedures, calibration instructions (where
applicable), schematics, and a replacement parts list.
9 Options -17 0 Through -17 9
Covers Options -17 0 through -17 9 in subsections ordered
numerically by option number. Includes theory of operation,
performance test procedures, calibration instructions (where
applicable), schematics, and a replacement parts list.
9A Scan/Alarm Option -201
Includes description, theory of operation, performance test
procedure, parts list, and schematic diagram.
10 Appendices
A Specifications
B Federal Supply Codes for Manufacturers C Service Centers D
Manual Status Information