Singer 18-36 Maszyna do szycia
Producent:
Zdjęcie 1 z 1
Jeśli masz inne zdjęcia lub instrukcje obsługi dla
Singer 18-36, możesz przesłać pliki tutaj .
Model:
18-36
Data:
1935
Kategoria:
Grupa:
Opis:
Informacja
The Class 18 Machines, described in the following list, are
each provided with cylinder bed. disc balance wheel at left
hand side, hollow needle bar, and swing back type of bobbin
winder for attachment to table.
They are designed for vamping shoes, etc., and for stitching
other varieties of work in light and medium weight leathers.
A flat work plate which can be readily attached or detached
is furnished when specified on order.
Machine 18-22 has one needle and a long beak shuttle, a
roller presser and a drop feed at the left of the needle.
The cylinder bed is 2x/i inches in diameter and U)}X2 inches
in length from the needle to the base of the arm. It, is
used for shoe work.
Machine 18-23 has one needle and a long beak shuttle, a
roller presser and wheel feed at the left of the needle. The
cylinder bed is 2Y2 inches in diameter and H)}^ inches in
length from the needle to the base of the arm. It is used
for shoe vamping and other work in leather.
Machine 18-25 has two needles and two long beak shuttles, a
roller presser and drop feed at the left of the needles. The
cylinder bed is 2J/<i inches in diameter and 10% inches in
length from the left hand needle to the base of the arm. The
distance between the two needles may be from ä’2 to 1,f inch
as desired. It is used for shoe vamping and other work in
leather.
Machine 18-26 has two needles and two long beak shuttles, a
roller presser and wheel feed at the right of the needles.
The cylinder bed is 2l/2 inches in diameter and lO)^ inches
in length from the left hand needle to the base of the arm.
The distance between the two needles may be from 3 to }
ginch. It is used for shoe vamping and other work in leather.
Machine 18-27 has one needle and a central bobbin shuttle, a
roller presser and drop feed at the left of the needle. The
cylinder bed is 2 inches in diameter and 10J^ inches in
length from the needle to the base of the arm. It is used on
children’s shoes and other articles having a small opening.
Machine 18-35 has one needle and a long beak shuttle, a
roller presser and drop feed at. the left of the needle. The
cylinder bed is 2}/2 inches in diameter and Γ>5^ inches in
length from the needle to the base of the arm. It is used
for general work in leather.
Machine 18-36 has two needles and two long beak shuttles, a
roller presser and drop feed at the left of the needle. The
cylinder bed is 23^ inches in diameter and 53^ inches in
length from the left hand needle to the base of the arm. The
distance between the needles may be from ^ to ) inch, as
desired. It is used for vamping shoes and other work in leather.
Machine 18-37 has one needle and a long beak shuttle, a
roller presser and wheel feed at the left of the needle. The
cylinder bed is 2x/2 inches in diameter and 5^ inches in
length from the needle to the base of the arm. It is used
for general work in leather.
Typ ręczny:
Instrukcja obsługi
Strony:
10
Rozmiar:
501.46 Kbytes (513492 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, czytając częściowo źle, nie częściowo czytelny.
Data przesłania:
2015 11 15
MD5:
6706e06a70e75f069e0b9fb4b7ec2b09
Pobrane:
3909