Informacji Wyposażenie:

Hewlett Packard 8754A Network Analyzer
Producent:
Hewlett Packard
Model: 8754A
Data: 1979
Kategoria: Przyrządy pomiarowe
Grupa: Network Analyzer
Opis:
Informacje:
                                    The HP Model 8754A Network Analyzer consists of an
internally leveled, 4- to 1300-MHz, swept source. Polar or
rectangular measurements are displayed on a cathode-ray tube
(CRT) through two independent channels. With appropriate
signal-routing accessories, the 8754A is a fully integrated
stimulus/response test system that measures magnitude and
phase characteristics of linear networks by comparing the
incident signal with the signal transmitted by the device
under test or reflected from its input.
1-20. The basic transmission measurements are
insertion loss or gain, insertion phase, and transmission
coefficient (S2i or Si2)· The basic reflection measurements
are return loss, from which SWR can be calculated, and
reflection coefficient (Sjj or S22X from which impedance can
be calculated or read from a Smith chart overlay.

Te Podręczniki są dostępne dla powyższego urządzenia:

Hewlett Packard -- 8754A -- Serwis i User Manual
Nazwa pliku: HewlettPackard-6820-Manual-Page-1-Picture
Instrukcja obsługi Typ: Serwis i User Manual
Strony: 627
Rozmiar: 26.60 Mbytes (27888395 Bytes)
Język: Angielski
Weryfikacja:
Manual-ID/Number: 08754-90015
Data: maj 1979
Jakość: Skanowany dokument, wszystko czytelne.
Czas trwania filmu:
MD5: 0c7e75523e267047fa5864f6c9a06569
Pliki do pobrania: 180 od 30 maj 2015
Informacje:
This manual applies directly to instruments whose serial
number prefix is 1914A.

This Operating and Service Manual contains information
required to install, operate, test, adjust, and service the
Hewlett-Packard Model 8754A Network Analyzer. Figure 1-1
shows the instrument and accessories supplied. This section
covers instrument identification, description, options,
accessories, specifications, and other basic information.
1-3. This manual is divided into eight sections, which
provide the following information:
a. SECTION I, GENERAL INFORMATION, presents a brief
description of the instrument, specifications, and lists of
accessories and recommended test equipment.
b. SECTION II, INSTALLATION AND OPERATION VERIFICATION,
presents information relative to initial inspection,
preparation for use, mounting, packing, shipping, and
operation verification.
c. SECTION III, OPERATION, presents instructions for
operation of the instrument.
d. SECTION IV, PERFORMANCE TESTS, presents procedures
required to verify that performance of the instrument is in
accordance with published specifications.
e. SECTION V, ADJUSTMENTS, presents procedures required to
properly adjust and align the instrument after repair.
f. SECTION VI, REPLACEABLE PARTS, presents information
required to order all parts and assemblies.
g. SECTION VII, MANUAL BACKDATING CHANGES, presents
backdating information to make this manual compatible with
earlier shipment configurations.
h. SECTION VIII, SERVICE, presents circuit descriptions,
schematic diagrams, component location diagrams, and
troubleshooting procedures to aid the user in maintaining
the equipment.
HewlettPackard-6820-Manual-Page-1-Picture
Start do pobrania za darmo


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics