Hewlett Packard 5005A Multimetr cyfrowy
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Hewlett Packard 5005A ?
Jeśli masz jakieś inne podręczniki dla
Hewlett Packard 5005A, możesz przesłać pliki tutaj .
Model:
5005A
Data:
1981
Kategoria:
Grupa:
Opis:
Signature Multimeter
Informacja
The 5005A Signature Multimeter is a multipurpose instrument
for troubleshooting electronic logic circuits to the
component level. The 5005A can display digital “signatures”
of logic circuits. This method of troubleshooting is called
“signature analysis”. Typically a logic product designed for
signature analysis troubleshooting will have a programmed
controller and a stored or externally-provided test program
which can exercise most of the unit.
1-9. The 5005A also measures frequency, pulse counts, time
intervals, DC voltages, voltage differences, positive or
negative peak voltages, and resistances.
Typ ręczny:
Serwis i User Manual
Strony:
236
Rozmiar:
20.35 Mbytes (21342179 Bytes)
Język:
english
Rewizja:
First edition
Ręczny ID:
05005-90001
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2015 05 30
MD5:
46814cb0938bd193bfb6a55546252f8e
Pobrane:
1102
Informacja
SERIAL PREFIX: 2112
This Operating and Service Manual contains the information
required to operate, test, adjust, and service the
Hewlett-Packard Model 5005A Signature Multimeter. The
multimeter with its supplied Accessories is shown in Figure 1-1.
1-3. MANUAL SUMMARY
1-4. This manual is divided into eight sections, each
covering a particular topic for the operation and service of
the HP 5005A, The topics by section number are:
SECTION I, GENERAL INFORMATION. Provides the instrument
specifications, instrument identification, Accessories and
recommended test equipment.
SECTION II, INSTALLATION. Provides information about initial
inspection, preparation for use, storage and shipment.
SECTION III, OPERATION. Provides information about operating
characteristics, panel features, Operator’s Check, operating
instructions, measurement procedures, and maintenance.
SECTION IV, PERFORMANCE TESTS. Provides abbreviated
procedures for operational verification which give the
operator a high degree of confidence that the 5005A is
operating properly. Also provides expansive performance test
procedures which test the electrical performance of the
5005A, using the specifications in Table 1-1 as standards.
SECTION V, ADJUSTMENTS. Provides the procedures and
adjustment locations required to properly maintain the
instrument operating characteristics within specifications.
SECTION VI, REPLACEABLE PARTS. Provides ordering information
for all replaceable parts and assemblies within the instrument.
SECTION VII, MANUAL CHANGES. This section is reserved for
manual change information which effectively "backdates” the
technical areas of the manual to apply to older instruments.
SECTION VIII, SERVICE. This section provides the instrument
theory of operation, troubleshooting information, repair
techniques, and schematic diagrams.