Informacji Wyposażenie:

Electro Scientific Industries 250-DA Multimetr analogowy
Producent:
Electro Scientific Industries
Model: 250-DA
Data: 1960
Kategoria: Przyrządy pomiarowe
Grupa: Multimetr analogowy
Opis: Impedance Bridge
Informacje:
                                    WHAT THE BRIDGE MEASURES
The ESI Model 250-DA Impedance Bridge measures resistance,
inductance and capacitance. It also measures the dissipation
factor (D) and the storage factor (Q) of inductors and
capacitors.
Resistance measurements are usually made with direct current
because of the increased accuracy and the lack of hum pickup
and stray capacitance effects. Resistance measurements can
be made using ac, but they may require external reactance
compensation.
Inductance and capacitance measurements are made in terms of
a simple two-element circuit with the same impedance as the
unknown. The bridge dials read the values of this equivalent
circuit. An equivalent series circuit is used for capacitors
and low Q inductors; an equivalent parallel circuit is used
for high Q inductors.

Te Podręczniki są dostępne dla powyższego urządzenia:

Electro Scientific Industries -- 250-DA -- Serwis i User Manual
Nazwa pliku: ESI-6664-Manual-Page-1-Picture
Instrukcja obsługi Typ: Serwis i User Manual
Strony: 75
Rozmiar: 3.10 Mbytes (3246268 Bytes)
Język: Angielski
Weryfikacja:
Manual-ID/Number:
Data: styczeń 1960
Jakość: Skanowany dokument, czytając częściowo źle, nie częściowo czytelny.
Czas trwania filmu:
MD5: 5a5a5879bb8cc9cfb0233446fad7af93
Pliki do pobrania: 127 od 11 maj 2015
Informacje:
Controls
1.1
Circuit Selector
1.2
Multiplier Switch
1.3
Main Dial Assembly
1.4
D-Q Dial
1.5
Unknown Terminals
1.6
External Generator Terminals
1.7
External D-Q Terminals
1—·
.
00
External Detector Terminals
1.9
Detector Switch
1.10
Generator Switch
1.11
Galvanometer
1.12
Power Switch and AC Amplifier Gain
1.13
AC - DC Switch and AC Generator Gain
1.14
DC Generator Voltage Switch
1.15
AC Generator Tuning Network
1.16
AC Detector Tuning Network
1.17
AC Null Indicator
00
•
AC Amplifier Output Terminals
1.19
Fuse
1.20
Power Indicator Lamp
2. Operating Instructions
2.1 What the Bridge Measures
2.2 Resistors
2.2.1 Measuring Resistors
2.2.2 Things to Watch Out For
2.2.3 Measuring AC Resistance
2.3 Inductors
2. 3.1 Measuring Inductors
2.3.2 Series and Parallel Inductance
2.3.3 Things to Watch Out For
2.3.4 Inductance Measurements with DC
2.3.5 AC Voltage Measurement
2.3.6 AC Current Measurement
2.3.7 Sliding Balance
2.3.8 Using an External Q Rheostat
2.4 Capacitors
2.4.1 Measuring Capacitors
2,4.2. Series and Parallel Capacitance
2.4.3 Things to Watch Out For
2.4.4 Capacitance Measurements with DC
2.4.5 AC Voltage Measurement
2.4.6 Extended Leads
2.4.7 Sliding Balance
2.4.8 Using an External D-Q Rheostat
2. 5 Using Bridge Elements
2.5.1 Standard Resistors
2.5.2 DEKASTAT® Variable Resistor
2.5.3 Standard Capacitors
3. Circuit Diagrams
3.1 Series Inductance Bridge
3.2 Parallel Inductance Bridge
3.3 Resistance Bridge
3.4 Series Capacitance Bridge
3, 5 Basic Circuits
3.6 Bridge Circuit Diagram
3.7 Generator-Detector Circuit Diagram
3.8 Bridge Wiring Diagram
3.9 Bridge Parts Placement
3.10 Generator-Detector Parts Placement
4, Bridge Element Voltage and Current Limits
5, Convenient Audio Frequency Units
6, Servicing and Repair
6.1 Preliminary Checking
6.2 Checking Procedure
6*2,1 Test Equipment and Tools
6.2.2 Trouble Shooting Chart
6.2.3 Checking the DC Generator
6.2.4 Checking the Galvanometer
6.2.5 Checking the AC Generator
6.2.6 Checking the AC Detector
6.2.7 Checking the Range Resistors
6.2.8 Checking the Standard Resistors
6.2.9 Checking the MAIN DIAL DEKASTAT*
6.2.10 Checking the D-Q Rheostats
6.2.11 Checking the Standard Capacitor
6.3 Removing the Chassis from the Case
6.3.1 Removing the Chassis
6.3.2 Replacing the Chassis
6.4 Repairing the Bridge
ESI-6664-Manual-Page-1-Picture
Start do pobrania za darmo


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Type the numbers for four hundred seventy-two.
Powered by Commentics