Fluke PM2813 Zasilanie
Producent:
Model:
PM2813
Data:
1998
Kategoria:
Grupa:
Opis:
Programmable Power Supply

Informacja

The powerful operating features have been combined with an easy and logical operation so that the full power of this instrument can be used every day. The main operating features are: • Multiple output, dc Power supply • Output modules with various voltage and current ratings • Suitable for GPIB as well as benchtop applications • Conforms to SCPI and IEEE 488.2 standards • Non volatile memory for 999 settings • Power down memory (front panel settings) • Readback of actual voltage and current • Manual and automatic step function • Overvoltage and overcurrent protection • Overtemperature and sense protection • Coupled protection of output channels • Closed case calibration facility (protected by password) • External trigger facilities (auto step) • Built-in self-test and diagnostics routines

pokaż więcej

Instrukcja obsługi
Typ ręczny:
Instrukcja obsługi
Strony:
115
Rozmiar:
485.38 Kbytes (497034 Bytes)
Język:
english
Rewizja:
3
Ręczny ID:
4822 872 00824
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2014 11 30
MD5:
3767e7338947f1d76f05ecbee03b03be
Pobrane:
2685

Informacja

1 OPERATOR SAFETY ... . ... 1-1 1.1 INTRODUCTION ... . ... 1-1 1.2 SAFETY PRECAUTIONS ... . ... 1-1 1.3 CAUTION AND WARNING STATEMENTS ... 1-1 1.4 SYMBOLS ... . ... 1-2 1.5 IMPAIRED SAFETY ... . ... 1-2 2 INTRODUCTION ... . ... 2-1 2.1 INTRODUCTION TO YOUR PROGRAMMABLE POWER SUPPLY ... . ... 2-1 2.2 Basic OPERATION ... . ... 2-4 2.2.1 Local operation ... . ... 2-6 2.2.2 Remote operation ... . ... 2-7 2.2.3 Sense modes ... . ... 2-10 2.3 ADVANCED OPERATION ... . ... 2-12 2.3.1 Output channel interconnections ... . ... 2-12 2.3.2 Multiple loads ... . ... 2-13 3 INSTALLATION INSTRUCTIONS ... . ... 3-1 3.1 INTRODUCTION ... . ... 3-1 3.2 INITIAL INSPECTION ... . ... 3-1 3.3 OPERATOR SAFETY INSTRUCTIONS ... . ... 3-1 3.4 INSTALLATION ... . ... 3-2 3.4.1 Mechanical installation ... . ... 3-2 3.4.2 Electrical installation ... . ... 3-3 3.4.3 Front Connection Unit ... . ... 3-4 3.5 OUTPUT CONNECTIONS ... . ... 3-7 3.5.1 Output channel connections ... . ... 3-7 3.5.2 GPIB connections ... . ... 3-8 3.5.3 Trigger bus connections ... . ... 3-8 3.6 ACCEPTANCE TESTS ... . ... 3-9 3.6.1 Brief check ... . ... 3-9 3.6.2 Interface check ... . ... 3-11 3.6.3 Performance Verification ... . ... 3-12 4 GETTING FAMILIAR WITH THE Power supply ... 4-1 4.1 INITIAL SETUP OF YOUR Power supply ... 4-1 4.1.1 Power up routine ... . ... 4-1 4.1.2 Instrument identification ... . ... 4-2 4.2 FRONT PANEL LAYOUT ... . ... 4-3 4.2.1 Keyboard controls ... . ... 4-3 4.2.2 Display indicators ... . ... 4-6 4.3 OUTPUT CHANNEL CONNECTIONS ... . ... 4-7 4.4 GETTING STARTED ... . ... 4-8 4.4.1 Selecting an output channel ... . ... 4-8 4.4.2 Setting an output voltage ... . ... 4-9 4.4.3 Setting an output current ... . ... 4-10 5 USING YOUR PROGRAMMABLE Power supply ... 5-1 5.1 INTRODUCTION ... . ... 5-1 5.2 LOCAL OPERATION ... . ... 5-2 5.3 REMOTE OPERATION ... . ... 5-3 5.4 OPERATING FEATURES ... . ... 5-4 5.5 HOW TO USE THE OPERATING FEATURES ... . . . 5-7 5.5.1 Output channel characteristics ... . ... 5-7 5.5.2 Local and remote sensing ... . ... 5-10 5.5.3 Constant voltage or constant Current source ... . . 5-13 5.5.4 Store/recall function ... . ... 5-19 5.5.5 Step functions ... . ... 5-22 5.6 ADVANCED USE ... . ... 5-28 5.6.1 Parallel connection of output channels ... . . . 5-29 5.6.2 Serial connection of output channels ... 5-32 5.6.3 Parallel connection of loads ... . ... 5-35 5.6.4 Tips for Remote Sensing Applications ... . . . 5-36 APPENDIX A Accessories ... . ... A-1 A.1 Supplied with the instrument ... . ... A-1 A.2 Optional ... . ... A-1 APPENDIX B SCPI CONFORMANCE INFORMATION ... .B-1 B.1 IEEE 488.2-1987 ... . ... B-1 B.2 SCPI Std 1993.0 Confirmed ... . ... B-1 B.3 SCPI approved ... . ... B-4 B.4 SCPI syntax and style ... . ... B-5 APPENDIX C ABBREVIATIONS, SYMBOLS & TERMS ... C-1 C.1 Abbreviations ... . ... C-1 C.2 Glossary of symbols ... . ... C-5 C.3 Glossary of terms ... . ... C-6 APPENDIX D APPLICATION FOR PM2812 AND PM2813, ... D-1 INDEX ... . ... I-1

pokaż więcej

Instrukcja serwisowa
Typ ręczny:
Instrukcja serwisowa
Strony:
212
Rozmiar:
4.20 Mbytes (4399412 Bytes)
Język:
english
Rewizja:
2
Ręczny ID:
4822 872 00827
Data:
1997 05 01
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2018 01 16
MD5:
7bbb1f1c3baa10f50f033b4d6e1a6a87
Pobrane:
3525

Informacja

HOW TO USE THIS MANUAL This reference manual has been aimed at the experienced user as well as the user new to Programmable Power Supplies, It will help the reader to operate the Power supply manually (local operation) or from a PC via the General Purpose Interface Bus (remote operation). This manual contains the following information Chapter 1 OPERATING INSTRUCTIONS Gives fuli reference Information about operating your power supply in the following modes: 1) locally (via the keys and the display) 2) remoteiy (via programming commands and queries) Chapter 2 MAINTENANCE INSTRUCTIONS Gives information about how to maintain your Power supply, covering preventive measures as well as corrective measures. Appendix A TECHNICAL SPECIFICATIONS Gives performance specifications about your programmable power supply. Appendix B PERFORMANCE VERIFICATION PROCEDURE Describes how to conduct a performance verification test for your programmable Power supply. Appendix C CALIBRATION PROCEDURES Describes how to calibrate your Power supply manually using the keys or remotely via a GPIB controller. Appendix D ERROR MESSAGES Index Gives a summary and explanation of the error messages. This is an alphabetical list of all remote commands and Queries.

pokaż więcej