WRL Electronics Globe Chief 90 Nadajnik
Producent:
Zdjęcie 1 z 1
Jeśli masz inne zdjęcia lub instrukcje obsługi dla
WRL Electronics Globe Chief 90, możesz przesłać pliki tutaj .
Model:
Globe Chief 90
Data:
0
Kategoria:
Grupa:
Opis:
Informacja
1-1. GENERAL.
1-2. The WRL Globe Chief Transmitter, Model 90, is made by
WRL Electronics, Inc., of Council Bluffs, Iowa for World
Radio Laboratories, Inc., of Council Bluffs, Iowa. The
Transmitter is rated at 75 watts input power for operatic«
by the holder of a Novice Class amateur radio license, or
may be operated at 90 watts input by the holder of a General
Class, or higher class license. The WRL Globe Chief has been
designed to provide the amateur radio operator with a
complete CW Transmitter of adequate power for world wide
contacts. Complete bandswitching is included for maximum
convenience. A wide variety of Antenna types may be used
with the Transmitter due to the pi-network output circuit.
Modified blocked-grid keying has been incorporated for
increased safety; the voltage appearing across the key is
held to less than 75 volts. The Transmitter has been
designed to allow the addition of a plate modulator; or, if
radiotelephone operation is desired at minimum cost, a
screen modulator may be employed. Provision for use with an
external VFO has been incorporated. Voltage for operating an
Antenna changeover relay is available at the auxiliary
socket on the rear of the Transmitter.
1-3. DESCRIPTION.
1—4. The model 90 Transmitter is completely self-contained
in a metal cabinet. Dimensions are 8 inches hight, 8 inches
deep, and 14-1/4 inches wide. Net weight is approximately
22-1/2 pounds. Ventilating grilles are provided in the
cabinet to assure adequate ventilation and heat dissipation.
The meter and cabinet are fully shielded for TVI reduction.
The unit may be removed from the cabinet for inspection and
servicing. Power requirements are 115 volts A.C., 50/60
cycles, single phase. Power consumption is approximately 160
watts for 75 watts plate input, or 175 watts for 90 watts
plate input.
Typ ręczny:
Instrukcja obsługi
Strony:
18
Rozmiar:
1.84 Mbytes (1931460 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2014 07 06
MD5:
26ca1e8019e1c360250fdc13a1d5c05b
Pobrane:
951
Informacja
SECTION I. General information on the WRL Globe Chief
transmitter ... 1
SECTION II. General information on operating the WRL Globe
Chief Transmitter ... 3
SECTION III. Parts moulting procedure (Kit Assembly)
... 7
SECTION IV. Wiring procedure (Kit Assembly)
... 13
SECTION V. Test procedure for the WRL Globe Chief transmitter
(Prior to operation after kit
assembly) ... 23
SECTION VI. Helpflul kit building
information ... 25
SECTION VII. General information concerning warranties,
service, replacements, etc.,
on the WRL Globe Chief
transmitter ... 29
SECTION VIII. Parts List
...
31
Page 7 to 18 and page 25 to 30 are missing in this file!