KW Communications KW 204 Nadajnik
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
KW Communications KW 204 ?
Jeśli masz jakieś inne podręczniki dla
KW Communications KW 204, możesz przesłać pliki tutaj .
Model:
KW 204
Data:
0
Kategoria:
Grupa:
Opis:
Single Sideband Transmitter
Informacja
The K.W. 204 Transmitter is engineered for optimum
performance on SINGLE SIDEBAND SUPPRESSED CARRIER upper or
lower sideband, SINGLE SIDEBAND WITH CARRIER upper or lower
sideband and C.W. A TONE Oscillator is provided for sidetone
generation during C.W. operation. It operates on all Amateur
Bands between
1.8 MHz and 30 MHz. The power input is 180 watts PEP on SSB,
75 watts on AM and 150 watts on CW. A Pi output stage
provides a variable output impedance.
The Power Supply is built-in and operates from a supply
voltage of 117v or 234v - 5y> AC 45-65 Hz. An optional
plug-in VOX Unit is available.
Typ ręczny:
Serwis i User Manual
Strony:
29
Rozmiar:
1.25 Mbytes (1314417 Bytes)
Język:
english
Rewizja:
Issue 2
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2014 02 19
MD5:
70a95536026d7287f8ca9a5bc3a613a6
Pobrane:
706
Informacja
SECTION 1 “"
GENERAL DESCRIPTION AND SPECIFICATION
1.1 Introduction 1-1
1.2 Specification 1 - 1, 2
1.3 Tube and Semi-Conductor Complement 1-2
SECTION 2
CIRCUIT DESCRIPTION
2.1 Transmitter Circuits 2 - 1, 2
2.2 Oscillators 2-2
2.3 Control Circuits 2-4
2.4 Power Supply 2-4
SECTION 3 INSTALLATION
3.1 Unpacking 3-1
3.2 Station Installation 3-1
3.3 Installation with KW 1000 Linear Amp. 3-1
3.4 Optional Vox Unit Installation 3-1
3.5 Antenna 3-1
3.6 Initial Checks 3 - 1 & 4 - 1
SECTION 4 OPERATION
4.1 Setting Up 4-1
4.2 Netting 4-1
4.3 Tune Procedure 4-1,2
4.4 Setting of PA Load Control 4-2
4.5 S.S.B. Operation 4-2
4.6 A.M. Operation 4-2
4.7 C.W. Operation 4-2
4.8 160M S.S.B. Operation 4-3
4.9 VOX Operation 4 - 3, 4