Wavetek 9100 Calibrator
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Wavetek 9100 ?
If you have any other manuals for the
Wavetek 9100 you can upload the files here .
Model:
9100
Date:
1994
Category:
Group:
Description:
Universal Calibration System
Information
Model 9100 — the world’s best value
multi-product Calibrator
◆ Calibrates Over 15 Different Categories of General-Purpose
Test Equipment
◆ Options for Power Meter, Insulation / Continuity Tester
and Oscilloscope
Calibration — Internally Installed and Retrofittable
◆ Semi-Automated and Fully Automated Procedure Modes for Maximum
Calibration Throughput
◆ Fully Supported by Portocal-II/9010 Calibration Software
and Procedure
Libraries (updates via the World Wide Web from www.wavetek.com)
◆ Rapid Return on Investment
◆ Zero-Downtime Support Using Wavetek’s Model 4950 MTS
◆ Intuitive Front Panel Operation for Ease of Use
Unmatched Workload Coverage
If less to you’re calibrate and constantly less, more
Wavetek’s and being more Model asked with 9100 Calibration
System is the answer you’ve been waiting for. Its
exceptional performance in both
the analog and digital domain
allows it to calibrate an extremely
wide range of test and measurement
equipment – quickly, efficiently
and to ISO9000 requirements.
For the Model 9100
calibrating
everything from handheld digital
multimeters to high performance
digital-storage oscilloscopes is all part
of a day’s work.
Take advantage of the Model
9100’s unique procedure mode,
which guides operators step-by-step
through the entire calibration
process, and you’ll not only calibrate
more with less – you’ll do it faster.
The Model 9100 is a multi-
function Calibrator with a breadth
and depth of outputs never before
available from a single calibration
source. In addition to DC and AC
Voltage to 1050V, variable Resistance
to 400MΩ and DC and AC Current
to 20A (1000A via the optional
current coils), the Model 9100
delivers continuously variable
Capacitance values to 40mF and
Conductance values to 2.5
milli Siemens. It also generates
digitally synthesized and phase-
locked Sine, Square, Triangle,
Impulse and Trapezoidal waveforms,
variable amplitude Pulses to 10MHz,
Pulse Widths to 2 seconds, and Duty
Cycles between 0.05% and 99.95%.
Add one of the two Oscilloscope
calibration options and it generates
all the waveforms required to
calibrate oscilloscopes up to
250MHz or 600MHz.
Fit the insulation/continuity
tester option and it synthesizes
resistance values as high as 2GΩ at
test voltages up to 1000V. Fit the
power meter option and it
simultaneously generates variable
phase angle voltages and currents
that allow you to calibrate power
meters up to 1MW or 1MVAR.
No other multi-product Calibrator
gives you such wide workload
coverage and versatility. Weighing
in at only 41 lbs (18.5kg), it’s also
the ideal solution to on-site
calibration.
Manual type:
User Manual
Pages:
86
Size:
1.40 Mbytes (1467722 Bytes)
Language:
english
Revision:
3
Manual ID:
850299
Date:
1995 08 01
Quality:
Scanned document, all readable.
Upload date:
2018 08 15
MD5:
506faa9133d834fcb8c59eaff863f8c6
Downloads:
864
Information
Section 1 introduction
Section 2 Interconnections
Section 3 DC Voltage
Section 4 AC Voltage
Section 5 DC Current
Section 6 AC Current
Section 7 Resistance
Section 8 Conductance
Section 9 Frequency
Section 10 Mark/Period
Section 11 % Duty
Section 12 Auxiliary Functions
Section 13 Capacitance
Section 14 Temperature — Thermocouple
Section 15 Temperature —- RTD
Section 16 Logic Pulses
Section 17 Logic Levels
Section 18 Error Messages
Manual type:
User Manual
Pages:
168
Size:
22.45 Mbytes (23537459 Bytes)
Language:
english
Revision:
Issue 4.0
Manual ID:
850306
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 09
MD5:
582b8a5bd10ed7bcc9fd9bcf77cb1586
Downloads:
1012
Information
User's Handbook
Volume 3 Option 250: 250MHz Oscilloscope Calibration Module
Option 600: 600MHz Oscilloscope Calibration Module
Operation and Performance
Volume 3 — Model 9100 Universal Calibration System (This
Volume) Option 250: 250MHz Oscilloscope Calibration Module
Option 600: 600MHz Oscilloscope Calibration Module Operation
and Performance
Section 11 Options 250 & 600: 250MHz and 600MHz Oscilloscope
Calibration Module Page
11.1 About Section
1 ... 11-1
11.2 Introduction to Options 250 and
600 ...
11-2
11.2.1
Functions ... 11-2
11.2.2 Operating
Modes ... 11-3
11.2.2 System
Operation ... 11-3
11.3 Associated
Products ... 11-4
11.4 UUT Calibration Procedure
Library ... 11-4
11.5 Printer
Support ... 11-4
11.6 UUT Calibration
Certificates ... 11-5
11.6.1 Procedure Mode Results
Printouts ... 11-5
11.7 Inventory
Management ... 11-5
11.8
Documentation ... 11-5
Section 12 Installing Option 250 or 600 Page
12.1 About Section
12 ... 12-1
12.2 Oscilloscope
Connections ... 12-1
12.2.1
SIGOUT ... 12-1
12.2.2 TRIG
OUT ... 12-2
12.2.3 50Ω
Terminations ... 12-2
12.2.4 50Ω T-Connector and Extra
Cables ... 12-2
Section 13 Options 250 and 600 Controls Page
13.1 About Section
13 ... 13-1
Section 14 Using Options 250 and 600 — Manual Mode Page
14.1 About Section
14 ... 14.1-1
14.2
Interconnections ... 14.2-1
14.2.1
Introduction ... 14.2-1
14.2.2 External
Interconnections ... 14.2-1
14.2.3 UUT Oscilloscope
Signal ... 14.2-1
14.2.4 UUT Oscilloscope
Trigger ... 14.2-2
14.3 'Auxiliary' Oscilloscope
Functions ... 14.2-1
14.3.1
Introduction ... 14.3-1
14.3.2 Selection of Auxiliary and Oscilloscope
Functions ... 14.3-2
14.3.3 Screen Keys — Function
Selection ... 14.3-3
0-2
14.4 Square
Function ... 14.4-1
14.4.1 Introduction and Topic
List ... 14.4-1
14.4.2 Auxiliary and Oscilloscope Functions
Selection ... 14.4-2
14.4.3 Square Function — Default
Screen ... 14.4-2
14.4.4 Screen
Keys ... 14.4-3
14.4.5 Value
Editing ... 14.4-4
14.4.6 Using the 9100 Square Function to Calibrate the
Amplitude Response
of a UUT
Oscilloscope ... 14.4-6
14.5 DC
Function ...
14.5-1
14.5.1 Introduction and Topic
List ... 14.5-1
14.5.2 Auxiliary and Oscilloscope Functions
Selection ... 14.5-2
14.5.3 DC Function — Default
Screen ... 14.5-2
14.5.4 Screen
Keys ... 14.5-3
14.5.5 Value
Editing ... 14.5-4
14.5.6 Using the 9100 DC Function to Calibrate the DC-Coupled
Amplitude Response of a UUT
Oscilloscope ... 14.5-6
14.6 Sine
Function ... 14.6-1
14.6.1 Introduction and Topic
List ... 14.6-1
14.6.2 Auxiliary and Oscilloscope Functions
Selection ... 14.6-2
14.6.3 Sine Function — Default
Screen ... 14.6-2
14.6.4 Screen
Keys ... 14.6-3
14.6.5 Value
Editing ... 14.6-5
14.6.6 Using the 9100 Sine Function to Calibrate the
Flatness/Bandwidth
of a UUT
Oscilloscope ... 14.6-8
14.7 Edge
Function ... 14.7-1
14.7.1 Introduction and Topic
List ... 14.7-1
14.7.2 Auxiliary and Oscilloscope Functions
Selection ... 14.7-2
14.7.3 Edge Function — Default
Screen ... 14.7-2
14.7.4 Screen
Keys ... 14.7-3
14.7.5 Value
Editing ... 14.7-5
14.7.6 Using the 9100 Edge Function to Calibrate the Pulse
Response
of a UUT
Oscilloscope ... 14.7-8
14.8 Markers
Function ... 14.8-1
14.8.1 Introduction and Topic
List ... 14.8-1
14.8.2 Auxiliary and Oscilloscope Functions
Selection ... 14.8-2
14.8.3 Markers Function — Default
Screen ... 14.8-2
14.8.4 Screen
Keys ... 14.8-3
14.8.5 Value
Editing ... 14.8-5
14.8.6 Trigger Timing
Relationship ... 14.8-7
14.8.7 Using the 9100 Markers Function to Calibrate the Time
Base
of a UUT
Oscilloscope ... 14.8-8
Section 15 Using the Model 9100 — Procedure Mode
15.1 About Section
15 ... 15-1
16.2 9100 Options 250 and 600 — SCPI Language - Commands and
Syntax ... 16-2
16.2.1
Introduction ... 16-2
16.2.2 CALibration
Subsystem ... 16-3
16.2.3 OUTPut
Subsystem ... 16-3
16.2.4 SOURce
Subsystem ... 16-4
Section 17 Options 250 and 600 Specifications Page
17.1
General ... 17-1
17.2 Products Provided with the Options 250 and 600 to the
Model 9100, ... 17-1
17.3 Square Function
Specifications ... 17-2
17.4 DC Function
Specifications ... 17-2
17.5 Sine Function
Specifications ... 17-3
17.6 Edge Function
Specifications ... 17-4
17.7 Markers Function
Specifications ... 17-5
17.8 Trigger Out
Specifications ... 17-6
Section 18 Options 250 and 600 — Routine Maintenance and
Test Page
18.1 About Section
18 ... 18-1
18.2 9100 Options 250 and 600 Routine Maintenance and
Repair ... 18-1
18.3 Model 9100 Options 250 and 600 Test and
Selftest ... 18-1
App. A: Error Reporting System — Additional Codes for
Options 250 and 600 ... 18-A1
Section 19 Verifying the Model 9100 Options 250 and 600
Specification Page
19.1 About Section
19 ... 19-1
19.2 Need for
Verification ... 19-1
19.3 Equipment
Requirements ... 19-2
19.4
Interconnections ... 19-2
19.5 Verification
Points ... 19-2
19.6 Calculating Absolute Specification
Limits ... 19-3
19.7 Verification
Procedure ... 19-3
19.8 Options 250 and 600 Verification by Functions — Topic
List ... 19-4
19.8.1 Verifying the Edge
Function ... 19-5
19.8.2 Verifying the DC
Function ... 19-11
19.8.3 Verifying the Square
Function ... 19-15
19.8.4 Verifying the Markers
Function ... 19-19
19.8.5 Verifying the Sine
Function ... 19-22
Section 20 Calibrating the Model 9100 Options 250 and 600 Page
20.1 About Section 20
... 20.1-1
20.2 Front Panel Calibration by
Functions ... 20.2-1
20.2.1 Introduction and Topic
List ... 20.2-1
20.2.2 Summary of Calibration
Process ... 20.2-2
20.2.3 Edge Function
Calibration ... 20.2-3
20.2.4 DC Function
Calibration ... 20.2-7
20.2.5 Square Function
Calibration ... 20.2-11
20.2.6 Sine Function LF
Calibration ... 20.2-15
20.2.7 Sine Function HF Linearity
Calibration ... 20.2-19
20.2.8 Sine Function HF Flatness
Calibration ... 20.2-25
Manual type:
User Manual
Pages:
275
Size:
897.26 Kbytes (918795 Bytes)
Language:
english
Revision:
Issue 8.0
Manual ID:
850301
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 09
MD5:
694aa36ec0682dd8a3d32e6b40e1925b
Downloads:
669
Information
User's Handbook
Volume 2 — Performance
(for Introduction, Installation, Controls (with Tutorial),
Manual Mode and Procedure Mode
refer to Volume 1 — Operation)
(for Options 250 and 600 refer to Volume 3 — Operation and
Performance)
Volume 2 — Performance (This Volume)
Section 6 Remote Interfaces
6.1 About Section 6
...
6-1
6.2 Index of IEEE-488.2 and SCPI Codes used in the Model
9100 ... 6-2
6.3 Introduction
...
6-4
6.4 Using the Model 9100 in a System
...
6-8
6.5 Retrieval of Device Status Information
... 6-15
6.6 Model 9100 SCPI Language - Commands and Syntax
... 6-24
6.7 The IEEE Bus Interface for the Power Option
... 6-58
Section 6 Appendix A: IEEE 488.2 Device Documentation
Requirements ... 6-A1
Section 6 Appendix B: SCPI Conformance Information
... 6-B1
Section 6 Appendix C: IEEE 488.2 Common Commands and Queries
Implemented in the Model 9100
... 6-C1
Section 6 Appendix D: Model 9100 — Device Settings after
*RST ... 6-D1
Section 6 Appendix E: Model 9100 — Device Settings at Power
On ... 6-E1
Section 7 Model 9100 Specifications
7.1 General
...
7-1
7.2 Options and Associated Products
...
7-2
7.3 DC Voltage Specifications
...
7-3
7.4 AC Voltage Specifications
...
7-4
7.5 DC Current Specifications
...
7-8
7.6 AC Current Specifications
...
7-9
7.7 Resistance Specifications
...
7-14
7.8 Conductance Specifications
...
7-15
7.9 Frequency Function Specifications
...
7-16
7.10 Mark/Period Function Specifications
...
7-17
7.11 % Duty Cycle Function Specifications
...
7-18
7.12 Auxiliary Functions - Specifications
...
7-19
7-13 Capacitance Specifications
...
7-20
7.14 Thermocouple Temperature Specifications
... 7-21
7.15 RTD Temperature Specifications
...
7-22
7.16 Logic-Pulses Function Specifications
...
7-23
7.17 Logic-Levels Function Specifications
...
7-24
7.18 Insulation/Continuity Specifications
...
7-25
7.19 Power Specifications
...
7.27
Section 8 Model 9100 — Routine Maintenance and Test
8.1 About Section 8
...
8-1
8.2 Routine Maintenance
...
8-2
8.3 Model 9100 Test and Selftest
...
8-10
8.4 Printing Selftest Results
...
8-26
Section 8 Appendix A Error Reporting Subsystem
... 8-A1
Section 9 Model 9100 — Specification Verification
9.1 About Section 9
...
9-1
9.2 The Need for Verification
...
9-1
9.3 Equipment Requirements
...
9-2
9.4 Interconnections
...
9-2
9.5 Verification Points
...
9-3
9.6 Calculating Absolute Specification Limits
... 9-4
Section 10 Model 9100 — Calibration
10.1 About Section 10
...
10.1-1
10.2 The Model 9100 Calibration Mode
...
10.2-1
10.2.1 Introduction
...
10.2-1
10.2.2 Mode Selection
...
10.2-2
10.2.3 Selection of Calibration Mode
...
10.2-2
10.2.4 Special Calibration
...
10.2-5
10.2.5 Cold Junction Calibration
...
10.2-8
10.2.6 Standard Calibration
...
10.2-12
10.2.7 Overview of Calibration Operations
... 10.2-14
10.3 Standard Calibration — Basic Sequences
... 10.3-1
10.3.1 Introduction
...
10.3-2
10.3.2 Selecting Hardware Configurations
... 10.3-4
10.3.3 Selecting Target Calibration Values
... 10.3-5
10.3.4 Calibrating the Model 9100 at Target Values
... 10.3-9
10.3.5 Standard Calibration of AC Functions
... 10.3-13
10.4 Front Panel Calibration by Functions
...
10.4-1
10.4.1 Introduction
...
10.4-1
10.4.2 Summary of Calibration Process
... 10.4-2
10.4.3 DC Voltage Calibration
...
10.4-6
10.4.4 AC Voltage Calibration
...
10.4-14
10.4.5 DC Current Calibration
...
10.4-20
10.4.6 AC Current Calibration
...
10.4-28
10.4.7 Resistance Calibration
...
10.4-36
10.4.8 Capacitance Calibration
...
10.4-45
10.4.9 Insulation Resistance Calibration
... 10.4-51
10.4.10 Continuity Calibration
...
10.4-57
10.5 Remote Calibration of the Model 9100 via the IEEE 488
Interface ... 10.5-1
10.5.1 The Model 4950 MTS System
...
10.5-1
Manual type:
User Manual
Pages:
387
Size:
1.88 Mbytes (1972038 Bytes)
Language:
english
Revision:
Issue 8.0
Manual ID:
850300
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 09
MD5:
798bc61908d8764b0c7328204306192c
Downloads:
1123
Information
User's Handbook
Volume 1 — Operation
(for Remote Operation, Instrument Specification,
Specification Verification, Routine Maintenance and Calibration
refer to Volume 2 — Performance)
Contents
Volume 1 — Operation (This Volume)
Section 1 The Model 9100 Multifunction Calibrator
1.1 About Section 1
...
1-1
1.2 Introduction to the Model 9100
...
1-2
1.3 Model 9100 Options and Associated Products
... 1-6
1.4 UUT Calibration Procedure Library
...
1-7
1.5 Printer Support
...
1-8
1.6 UUT Calibration Certificates
...
1-8
1.7 Inventory Manaagement
...
1-8
1.8 Documentation
...
1-8
Section 2 Installing the Model 9100
2.1 About Section 2
...
2-1
2.2 Lifting and Carrying the Model 9100
...
2-2
2.3 Unpacking and Inspection
...
2-2
2.4 Storage
...
2-3
2.5 Preparation for Shipment
...
2-3
2.6 Calibration Enable Switch
...
2-3
2.7 Preparation for Operation
...
2-4
2.8 Connectors and Pin Designations
...
2-10
Section 3 Model 9100 Controls
3.1 About Section 3
...
3-1
3.2 Introduction to the Front Panel
...
3-2
3.3 Modes of Operation
...
3-4
3.3.1 Mode Selection
...
3-4
3.3.2 Configuration Mode
...
3-6
3.4 Working with Front Panel Controls — Tutorials
...
3-32
Section 4 Using the Model 9100 — Manual Mode
4.1 About Section 4
...
4.1-1
4.2 Interconnections
...
4.2-1
Functions:
4.3 DC Voltage
...
4.3-1
4.4 AC Voltage
...
4.4-1
4.5 DC Current
...
4.5-1
4.6 AC Current
...
4.6-1
4.7 Resistance
...
4.7-1
4.8 Conductance
...
4.8-1
4.9 Frequency
...
4.9-1
4.10 Mark/Period
...
4.10-1
4.11 % Duty
...
4.11-1
4.12 Auxiliary Functions
...
4.12-1
4.13 Capacitance
...
4.13-1
4.14 Thermocouple Temperature
...
4.14-1
4.15 RTD Temperature
...
4.15-1
4.16 Logic-Pulses
...
4.16-1
4.17 Logic-Levels
...
4.17-1
4.18 Insulation/Continuity
...
4.18-1
4.19 DC Power
...
4.19-1
4.20 AC Power
...
4.20-1
4.21 AC Harmonics
...
4.21-1
Section 5 Using the Model 9100 — Procedure Mode
5.1 About Section 5
...
5.1-1
5.2 Procedure Mode — Safety and General Notes
... 5.2-1
5.3 Procedure Mode — Access Guide
...
5.3-1
5.4 Procedure Mode — 'Adjustment Only' Procedure
... 5.4-1
5.5 Procedure Mode — '1 Year Verification' & 'ISO9000
Verify' Procedures ... 5.5-1
5.6 Procedure Mode — 'Verify Pass/Fail' & 'ISO9000
Pass/Fail' Procedures ... 5.6-1
Manual type:
User Manual
Pages:
362
Size:
11.90 Mbytes (12476765 Bytes)
Language:
english
Revision:
8
Manual ID:
850300
Date:
1998 06 01
Quality:
Scanned document, all readable.
Upload date:
2018 08 15
MD5:
9259d054ad066f993dc8c9f9a15013d9
Downloads:
694
Information
User's Handbook
Volume 1 -- Operation
Manual type:
User Manual
Pages:
264
Size:
8.66 Mbytes (9077328 Bytes)
Language:
english
Revision:
8
Manual ID:
850301
Date:
1998 06 01
Quality:
Scanned document, all readable.
Upload date:
2018 08 15
MD5:
b29e8811520dad1be2b4972cde2ab041
Downloads:
842
Information
User's Handbook
Volume 2 -- Performance
Section 1 The Model 9100 Multifunction Calibrator See Volume
1 - Operation
Section 2 Installing the Model 9100 See Volume 1 - Operation
Section 3 Model 9100 Controls See Volume 1 - Operation
Section 4 Using the Model 9100 — Manual Mode See Volume 1 -
Operation
Section 5 Using the Model 9100 — Procedure Mode See Volume 1
- Operatio
Volume 2 — Performance (This Volume)
Section 6 Remote Interfaces
6.1 About Section
6 ... 6-1
6.2 Index of EEE-488,2 and SCPI Codes used in the Model
9100 ... 6-2
6.3
Introduction ... 6-4
6.4 Using the Model 9100 in a
System ... 6-8
6.5 Retrieval of Device Status
Information ... 6-15
6.6 Model 9100 SCPI Language - Commands and
Syntax ... 6-24
6.7 The IEEE Bus Interface for the Power
Option ... 6-58
Section 6 Appendix A: IEEE 488.2 Device Documentation
Requirements ... 6-A1
Section 6 Appendix B: SCPI Conformance Information
... 6-B1
Section 6 Appendix C: IEEE 488.2 Common Commands and Queries
Implemented in the Model
9100 ... 6-C1
Section 6 Appendix D; Model 9100 — Device Settings after
*RST ... 6-D1
Section 6 Appendix E: Model 9100 — Device Settings at Power
On ... 6-E1
Section 7 Mode! 9100 Specifications
7.1
General ... 7-1
7.2 Options and Associated
Products ... 7-2
7.3 DC Voltage
Specifications ... 7-3
7.4 AC Voltage
Specifications ... 7-4
7.5 DC Current
Specifications ... 7-8
7.6 AC Current
Specifications ... 7-9
7.7 Resistance Specifications
... 7-14
7.8 Conductance
Specifications ... 7-15
7.9 Frequency Function
Specifications ... 7-16
7.10 Mark/Period Function
Specifications ... 7-17
7.11 % Duty Cycle Function
Specifications ... 7-18
7.12 Auxiliary Functions -
Specifications ... 7-19
7-13 Capacitance
Specifications ... 7-20
7.14 Thermocouple Temperature
Specifications ... 7-21
7.15 RID Temperature
Specifications ... 7-22
7.16 Logic-Pulses Function
Specifications ... 7-23
7.17 Logic-Levets Function
Specifications ... 7-24
7.18 Insulation/Continuity
Specifications ... 7-25
7.19 Power
Specifications ... 7.27
Section 8 Model 9100 — Routine Maintenance and Test
8.1 About Section
8 ...
8.2 Routine
Maintenance ...
8.3 Model 9100 Test and
Selftest ...
8.4 Printing Seiftest
Results ...
Section 8 Appendix A Error Reporting
Subsystem ...
Section 9 Model 9100 — Specification Verification
9.1 About Section
9 ...
9.2 The Need for
Verification ...
9.3 Equipment
Requirements ...
9.4
Interconnections ...
9.5 Verification
Points ...
9.6 Calculating Absolute Specification
Limits ...
Section 10 Model 9100 — Calibration
10.1 About Section
10 ...
10.2 The Mode! 9100 Calibration
Mode ...
10.2.1
introduction ...
10.2.2 Mode
Selection ...
10.2.3 Selection of Calibration
Mode ...
10.2.4 Special
Calibration ...
10.2.5 Cold Junction
Calibration ...
10.2.6 Standard
Calibration ...
10.2.7 Overview of Calibration
Operations ...
10.3 Standard Calibration — Basic
Sequences ...
10.3.1
Introduction ...
10.3.2 Selecting Hardware
Configurations ...
10.3.3 Selecting Target Calibration
Values ...
10.3.4 Calibrating the Model 9100 at Target
Values ...
10.3.5 Standard Calibration of AC
Functions ...
10.4 Front Panel Calibration by
Functions ...
10.4.1
Introduction ...
10.4.2 Summary of Calibration
Process ...
10.4.3 DC Voltage
Calibration ...
10.4.4 AC Voltage
Calibration ...
10.4.5 DC Current
Calibration ...
10.4.6 AC Current
Calibration ...
10.4.7 Resistance
Calibration ...
10.4.8 Capacitance
Calibration ...
10.4.9 Insulation Resistance
Calibration ...
10.4.10 Continuity
Calibration ...
10.5 Remote Calibration of the Model 9100 via the IEEE 488
Interface
10.5.1 The Mode! 4950 MTS
System ...
Manual type:
User Manual
Pages:
86
Size:
277.15 Kbytes (283803 Bytes)
Language:
english
Revision:
Issue 3
Manual ID:
850299
Date:
Quality:
Scanned document, all readable.
Upload date:
2014 11 09
MD5:
b499585b5357e108c37422498b065235
Downloads:
778
Information
OPERATOR'S GUIDE
(for operating, performance and maintenance details
refer to the User's Handbook)
Section 1 Introduction
Section 2 Interconnections
Section 3 DC Voltage
Section 4 AC Voltage
Section 5 DC Current
Section 6 AC Current
Section 7 Resistance
Section 8 Conductance
Section 9 Frequency
Section 10 Mark/Period
Section 11 % Duty
Section 12 Auxiliary Functions
Section 13 Capacitance
Section 14 Temperature — Thermocouple
Section 15 Temperature — RTD
Section 16 Logic Pulses
Section 17 Logic Levels
Section 18 Error Messages