Kepco APH 500M Power supply
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Kepco APH 500M ?
If you have any other manuals for the
Kepco APH 500M you can upload the files here .
Model:
APH 500M
Date:
1975
Category:
Group:
Description:
Information
Kepco Series APH Power Supplies are high voltage, low
current, precision-stabilized d-c sources of approximately
twenty watts of d-c output power. Their important design
features include;
a) AUTOMATIC CROSSOVER BETWEEN VOLTAGE AND CURRENT
STABILIZATION MODE OF OPERATION WITH VISUAL FRONT PANEL
(LED) MODE INDICATORS,
b) PRECISION, TEN-TURN FRONT PANEL OUTPUT VOLTAGE AND OUTPUT
CURRENT CONTROLS.
c) RECESSED FRONT PANEL OUTPUT METERS PERMIT THE
SIMULTANEOUS MONITORING OF OUTPUT VOLTAGE AND OUTPUT CURRENT.
d) FRONT AND REAR OUTPUT TERMINALS WITH REMOTE SENSING
PROVISION, ALLOW PRECISION STABILIZATION AT A DISTANT LOAD.
e) PROGRAMMING TERMINALS PERMIT ACCESS TO A BUILT-IN,
INDEPENDENT PREAMPLIFIER, TO THE VOLTAGE CONTROL AND MAIN
VOLTAGE AMPLIFIERS AND TO A SEPARATE CURRENT CONTROL
AMPLIFIER. A MODE FLAG SIGNAL OUTPUT (TTL COMPATIBLE), AS
WELL AS TWO D-C REFERENCE SOURCES (±6.2 volts at 1 mA MAX.}
REFERENCED TO COMMON (+ SENSE) ARE PROVIDED.
1-5 The APH Power supply can, in simplified form, be
electrically represented by the fold-out diagram in Section
III of this manual (see FiG. 3-15 at the end of Section
III). A high voltage, low current d-c source is controlled
by a series pass element (vacuum tube), which in turn is
controlled by the driver circuit via the voltage channel or
the current channel. The driver is connected to three
control amplifiers (Main Voltage, Internal Current Control,
External Current Control) via the gating circuit, which
permits only one Amplifier to take control of the APH output.
Manual type:
Service and User Manual
Pages:
59
Size:
2.80 Mbytes (2940958 Bytes)
Language:
english
Revision:
Manual ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2015 08 14
MD5:
53c75403f357588bf1f86a0c50f2dce1
Downloads:
809
Information
This manual contains instructions for the installation,
operation and maintenance of the APH High Voltage, Automatic
Crossover Power Supplies.