Thurlby Thandar Instruments TTI CPX200 Versterker
Fabrikant:
Model:
CPX200
Datum:
2013
Categorie:
Groep:
Omschrijving:
Dual 35V 10A Power Flex Power Supply

Informatie

Voltage Range: 0V to 35V Current Range: 0A to 10A Power Range: Up to 175W Output Voltage Setting: By coarse and fine controls. Output Current Setting: By single logarithmic control. Operating Mode: Constant voltage or constant current with automatic cross-over provided that the power demanded stays within the power envelope, see graph. Outside of this envelope the output becomes unregulated. Output Switch: Electronic. Preset voltage and current displayed when off. Output Terminals: Universal 4mm safety binding posts on 19mm (0·75”) pitch. Sensing: Switchable between local and remote. Spring-loaded push terminals for remote connection. Output Protection: Forward protection by Over-Voltage Protection (OVP) trip; maximum voltage that should be applied to the terminals is 50V. Reverse protection by diode clamp for reverse currents up to 3A. OVP Range: 10% to 110% of maximum output voltage set by front panel screwdriver adjustment. Line Regulation: <0.01% of maximum output for a 10% line change. Load Regulation: <0.05% of maximum output for a 90% load change, using remote sense. Ripple & Noise (20MHz bandwidth): 5mVrms max; typically <2mVrms, <20mV pk-pk, both outputs fully loaded (7A @ 25V), constant voltage mode. Transient Load Response: <2ms to within 100mV of set level for a 5% to 95% load change. Temperature Coefficient: Typically <100ppm/°C Status Indication: Output on lamp. Constant voltage mode lamp. Constant current mode lamp. Unregulated (power limit) lamp Trip message on display.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
38
Grootte:
259.52 Kbytes (265753 Bytes)
Taal:
english, german, french, italian
Herziening:
Issue 13
Handleidingen-ID:
48511-0260
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 03
MD5:
8871ac6635745c20a718020a35c97415
Downloads:
986

Informatie

Specification 2 Safety 4 EMC 6 Installation 7 Connections 8 Operation 9 Maintenance 11 Instructions en Francais Sécurité 12 Installation 13 Connexions 14 Opération 15 Maintenance 17 Bedienungsanleitung auf Deutsch Sicherheit 18 Installation 19 Anschlüsse 20 Betrieb 21 Wartung 24 Istruzioni in Italiano Sicurezza 25 Installazione 26 Collegamento 27 Funzionamento 28 Manutenzione 30 Instrucciones en Español Seguridad 31 Instalación 32 Conexiones 33 Funcionamiento 34 Mantenimiento 36

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
38
Grootte:
575.44 Kbytes (589255 Bytes)
Taal:
english, german, french, italian
Herziening:
Issue 12
Handleidingen-ID:
48511-0260
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2015 05 08
MD5:
de6dbfc46ad7e33f35ee96b1b27cdde2
Downloads:
1582

Informatie

Specification 2 Safety 4 EMC 6 Installation 7 Connections 8 Operation 9 Maintenance 11 Instructions en Francais Sécurité 12 Installation 13 Connexions 14 Opération 15 Maintenance 17 Bedienungsanleitung auf Deutsch Sicherheit 18 Installation 19 Anschlüsse 20 Betrieb 21 Wartung 24 Istruzioni in Italiano Sicurezza 25 Installazione 26 Collegamento 27 Funzionamento 28 Manutenzione 30 Instrucciones en Español Seguridad 31 Instalación 32 Conexiones 33 Funcionamiento 34 Mantenimiento 36

toon meer