Thurlby Thandar Instruments TTI 1906 Digitale multimeter
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Thurlby Thandar Instruments TTI 1906 ?
Als je nog andere handleidingen hebt voor de
Thurlby Thandar Instruments TTI 1906 kun je hier de bestanden uploaden .
Model:
1906
Datum:
2009
Categorie:
Groep:
Omschrijving:
Computing Multimeter
Informatie
This instrument is a mains operated, high performance autoranging multimeter providing 5½ digit resolution (± 210000 counts) switchable to 4½ digits (± 21000 counts) for a higher reading rate. It has a 7-segment l.e.d. display coupled with l.e.d. annunciators for displayed units and instrument status.
The main features are :-
• ARC serial Interface as standard, GPIB optional
• True RMS AC measurements
• Four-terminal Ohms
• Selectable audible continuity checker
• T/Hold mode - holds onto a stable reading until updated
• Display nulling - a different value can be set up for each function
• 100 point data logger - circular or linear store
• Measurement post-processing:-
percentage deviation from a user-entered reference
decibel calculations
linear scaling with offset
limits comparison for go/no go testing
automatic storage of minimum and maximum readings
• Selectable digital Filter
• Programmable buzzer
• Battery-backed RAM :-
storage of six instrument set-ups
automatic power up with last used settings.
retention of user entered references and scaling factors
retention of logged data
• Software calibration with constants stored in EEPROM
Handleidingen type:
Gebruikershandleiding
Pagina’s:
46
Grootte:
394.49 Kbytes (403958 Bytes)
Taal:
english
Herziening:
Issue 8
Handleidingen-ID:
48581-1070
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 03
MD5:
166796162a0d79fa13a814d7306ca4e4
Downloads:
637
Informatie
Introduction 1
Specification 2
Safety 5
EMC 7
Installation 8
Introduction to Front Panel 9
Making Basic Measurements 10
Advanced Features 13
Error Messsages 20
Default Instrument Settings 20
Remote Operation 21
Remote Commands 29
Maintenance and Repair 44
Handleidingen type:
Gebruikershandleiding
Pagina’s:
52
Grootte:
415.94 Kbytes (425919 Bytes)
Taal:
german
Herziening:
Issue 8
Handleidingen-ID:
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 03
MD5:
724a6ecdb11431435a7fc4607fdf21a2
Downloads:
490
Informatie
Introduction 1
Specification 2
Sicherheit 5
Installation 7
Einführung Zur Fronttafel 8
Grundmessungen 9
Fortgeschrittene Funktionen 12
Fehlermeldungen 21
Standardinstrumenteneinstellungen 21
Fernbetrieb 22
ARC-Fernbefehlsformate 30
Zusammenfassung der Fernbefehle 47
Wartung und Instandsetzung 49
Glossar 50
Handleidingen type:
Gebruikershandleiding
Pagina’s:
46
Grootte:
1.09 Mbytes (1138765 Bytes)
Taal:
english
Herziening:
Issue 7
Handleidingen-ID:
48581-1070
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 02
MD5:
8018e1732bc9bdac17f0aa5ec8598cde
Downloads:
632
Informatie
Introduction 1
Specification 2
Safety 5
EMC 7
Installation 8
Introduction to Front Panel 9
Making Basic Measurements 10
Advanced Features 13
Error Messsages 20
Default Instrument Settings 20
Remote Operation 21
Remote Commands 29
Maintenance and Repair 44
Handleidingen type:
Gebruikershandleiding
Pagina’s:
54
Grootte:
635.23 Kbytes (650475 Bytes)
Taal:
french
Herziening:
Issue 8
Handleidingen-ID:
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2015 05 08
MD5:
c57457770d68012888d8632d0b3d7aff
Downloads:
438
Informatie
Introduction 1
Specification 2
Securite 5
Installation 7
Presentation du panneau avant 8
Execution des mesures des base 9
Caracteristiques Evoluees 12
Messages d'erreur 20
Reglages par defaut de l'instrument 20
Fontionnement a distance 21
Commandes a distance 30
Resume des commandes a distance 45
Entretien et réparations 47
Glossaire 48
Handleidingen type:
Gebruikershandleiding
Pagina’s:
52
Grootte:
1.16 Mbytes (1214149 Bytes)
Taal:
german
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2015 05 08
MD5:
f107e17177424dde67bf931f4efbafa0
Downloads:
562
Informatie
Introduction 1
Specification 2
Sicherheit 5
Installation 7
Einführung Zur Fronttafel 8
Grundmessungen 9
Fortgeschrittene Funktionen 12
Fehlermeldungen 21
Standardinstrumenteneinstellungen 21
Fernbetrieb 22
ARC-Fernbefehlsformate 30
Zusammenfassung der Fernbefehle 47
Wartung und Instandsetzung 49
Glossar 50