Apparatuur informatie:

Tektronix 2215A Oscilloscoop
Fabrikant:
Tektronix
Model: 2215A
Datum: 1983
Categorie: Meetinstrumenten
Groep: Oscilloscoop
Beschrijving: Dual Channel 60MHz Oscilloscope
Informatie:
                                    The TEKTRONIX 2215A Oscilloscope is a rugged, lightweight,
dual-channel, 60-MHz instrument that features a bright,
sharply defined trace on an 80- by 100-mm cathode-ray tube
(crt). Its vertical system provides calibrated deflection
factors from 2 mV per division to 5 V per division. Trigger
circuits enable stable triggering over the full bandwidth of
the vertical system. The horizontal system provides
calibrated sweep speeds from 0.5 s per division to 50 ns per
division along with delayed-sweep features. A X10 magnifier
circuit extends the maximum sweep speed to 5 ns per division
when the A and B SEC/DIV switch is set to 0.05 per division.

Deze handleidingen zijn beschikbaar voor deze typen materieel:

Tektronix -- 2215A -- Servicehandboek
File name: Tektronix-1776-Manual-Page-1-Picture
Handleidingen Type: Servicehandboek
Pagina's: 203
Maat: 33.42 Mbytes (35047502 Bytes)
Taal: Engels
Herziening van:
Manual-ID/Number: 070-4735-00
Datum: juli 1984
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: 5db93475a54ac15fce043f0e260cd7d1
ed2kID: 426e0e9c29cb608c3f0a85fb39dbd846
Downloads: 2591 sinds 21 december 2009
Informatie:
Tektronix-1776-Manual-Page-1-Picture
Start Free Download


Tektronix -- 2215A -- Gebruikershandleiding
File name: Tektronix-2570-Manual-Page-1-Picture
Handleidingen Type: Gebruikershandleiding
Pagina's: 46
Maat: 36.90 Mbytes (38692414 Bytes)
Taal: Engels
Herziening van: Revised
Manual-ID/Number: 070-4732-00
Datum: december 1983
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: 7f2f26266d5b5cf0cef3a5b7bf0c6170
ed2kID: 2608ca4b1c463338efa8efe7258adace
Downloads: 1355 sinds 18 juni 2011
Informatie:
Tektronix-2570-Manual-Page-1-Picture
Start Free Download


Tektronix -- 2215A -- Servicehandboek
File name: Tektronix-8936-Manual-Page-1-Picture
Handleidingen Type: Servicehandboek
Pagina's: 203
Maat: 38.84 Mbytes (40729394 Bytes)
Taal: Engels
Herziening van: revised
Manual-ID/Number: 070-4735-00
Datum: 01 juli 1984
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: 4a02cf3d1ad6e050d923201c743ed599
ed2kID: d36a435cc8a5586b6ad1a81c91dc345d
Downloads: 6 sinds 23 april 2017
Informatie:
LIST OF ILLUSTRATIONS
........................................iii

LIST OF TABLES
......................................................iii

OPERATORS SAFETY SUMMARY ..........................iv

SERVICING SAFETY SUMMARY..............................v

SECTION 1 SPECIFICATION

INTRODUCTION ................................1-1

ACCESSORIES..................................1-1

PERFORMANCE CONDITIONS ________1-1

SECTION 2 OPERATING INSTRUCTIONS

PREPARATION FOR USE ................2-1

SAFETY ........................................2-1

LINE VOLTAGE ............................2-1

POWER CORD ..............................2-1

LINE FUSE ....................................2-1

INSTRUMENT COOLING..............2-2

CONTROLS, CONNECTORS, AND

INDICATORS......................................2-2

POWER, DISPLAY, AND PROBE

ADJUST ........................................2-2

VERTICAL ....................................2-3

HORIZONTAL................................2-4

TRIGGER ......................................2-5

REAR PANEL ................................2-7

OPERATING CONSIDERATIONS ...	2-8

GRATICULE ..................................2-8

GROUNDING ................................2-8

SIGNAL CONNECTIONS ..............2-8

INPUT COUPLING CAPACITOR

PRECHARGING ............................2-8

OPERATOR'S ADJUSTMENTS ________2-9

INTRODUCTION ..........................2-9

BASELINE TRACE........................2-9

TRACE ROTATION........................2-9

PROBE COMPENSATION ............2-10

SECTION 3 THEORY OF OPERATION

INTRODUCTION ................................3-1

SECTION ORGANIZATION ..........3-1

INTEGRATED CIRCUIT DESCRIPTIONS
............................................3-1

GENERAL DESCRIPTION ................3-2

DETAILED CIRCUIT DESCRIPTION	3-3

VERTICAL ATTENUATORS..........3-3

VERTICAL PREAMPLIFIERS ...	3-4
SECTION 3 THEORY OF OPERATION (cont)

CHANNEL SWITCH AND

VERTICAL OUTPUT .......... 3-5

TRIGGER AMPLIFIERS AND

SWITCHING ................. 3-7

A TRIGGER GENERATOR............3-8

A SWEEP GENERATOR AND

LOGIC............................................3-9

ALTERNATE B SWEEP ................3-11

HORIZONTAL ................................3-13

Z-AXIS AMPLIFIER ......................3-14

POWER SUPPLY AND PROBE

ADJUST ........................................3-16

SECTION 4 PERFORMANCE CHECK PROCEDURE

INTRODUCTION ................................4-1

PURPOSE ..................................4-1

STRUCTURE ................................4-1

TEST EQUIPMENT ......................4-1

LIMITS AND TOLERANCES ....	4-1

PREPARATION FOR CHECKS ..	4-2 INDEX TO PERFORMANCE

CHECK STEPS ............................4-3

VERTICAL ....................................4-4

HORIZONTAL................................4-7

TRIGGER ......................................4-11

EXTERNAL Z-AXIS AND PROBE

ADJUST ........................................4-14

SECTION 5 ADJUSTMENT PROCEDURE

INTRODUCTION ................................5-1

PURPOSE ....................................5-1

STRUCTURE ................................5-1

TEST EQUIPMENT ......................5-1

LIMITS AND TOLERANCES ....	5-1

ADJUSTMENT INTERACTION ..	5-1 PREPARATION FOR

ADJUSTMENT ..............................5-1

INDEX TO ADJUSTMENT

PROCEDURE STEPS ..................5-3

POWER SUPPLY AND CRT DISPLAY	5-4

VERTICAL..........................................5-6

HORIZONTAL ....................................5-13

TRIGGER ..........................................5-19

EXTERNAL Z-AXIS AND PROBE

ADJUST ............................................5-23
MAINTENANCE
STATIC-SENSITIVE COMPONENTS
PREVENTIVE MAINTENANCE
INTRODUCTION .............
GENERAL CARE .............
INSPECTION AND CLEANING . .
LUBRICATION ...............
SEMICONDUCTOR CHECKS . . .
PERIODIC READJUSTMENT .. .
TROUBLESHOOTING............
INTRODUCTION .............
TROUBLESHOOTING AIDS
TROUBLESHOOTING
EQUIPMENT ................
TROUBLESHOOTING
TECHNIQUES ...............
CORRECTIVE MAINTENANCE
INTRODUCTION .............
MAINTENANCE PRECAUTIONS .
OBTAINING REPLACEMENT
PARTS .....................
MAINTENANCE AIDS .........
MAINTENANCE (cont)
INTERCONNECTIONS .........
TRANSISTORS AND
INTEGRATED CIRCUITS .......
SOLDERING TECHNIQUES ....
REMOVAL AND REPLACEMENT
INSTRUCTIONS ..............
REPACKAGING FOR SHIPMENT
SELECTABLE COMPONENTS ..

OPTIONS

REPLACEABLE ELECTRICAL PARTS

DIAGRAMS

REPLACEABLE MECHANICAL PARTS

Accessories
Tektronix-8936-Manual-Page-1-Picture
Start Free Download


Commentaar

Nog geen berichten.

Commentaar Toevoegen

* Verplichte informatie
(wordt niet getoond)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the opposite word of weak?
 
Voer antwoord in:
 
Meld me over nieuwe berichten via email.
 
Onthoud mijn gegevens op deze computer.
 
 
Aangedreven door Commentics