Krohn-Hite Corporation 526 Calibrator
Fabrikant:
Afbeelding 1 van 5
Afbeelding 2 van 5
Afbeelding 3 van 5
Afbeelding 4 van 5
Afbeelding 5 van 5
Als je nog andere foto's of handleidingen hebt voor de
Krohn-Hite Corporation 526 kun je de bestanden hier uploaden .
Model:
526
Datum:
2013
Categorie:
Groep:
Omschrijving:
DC Source/Calibrator
Informatie
DC Source/Calibrator
•
Voltage Range: ±100nV to ±110V, 4 Ranges
with Full Carry and Borrow for each Decade
•
Current Range: ±10nA to ±110mA, 2 Ranges
with Full Carry and Borrow for each Decade
•
Resolution: 1ppm
•
Accuracy: 1 year, 20ppm.
•
Stability (24 hrs): 3ppm
•
Settling Time: 2ms
•
Compliance Voltage: 100V
•
Settable Voltage and Current Limits
•
Pass thru Zero Operation
•
“Crowbar” Zero Reference
•
Local and GPIB/Optional LAN Remote Control
•
Replaces the Analogic Model 8200
GENERAL DESCRIPTION
The Krohn-Hite model 526 Precision DC Voltage/Current
Source/Calibrator is a highly stable and repeatable DC
Voltage Source and DC Current source providing N.I.S.T.
traceable voltages and currents for use in production,
calibration labs, QA and QC departments, design labs, or
any place where an accurate voltage and Current source is
needed.
The 526 provides accurate voltages from ±100nVdc to
±111.1110Vdc to within 20ppm for 1 year, and precise
currents from ±10nA to ±111.1110mA to within 50ppm for 1
year. It is an extremely quiet source with <12μVrms of noise
measured over a 10Hz to 100kHz bandwidth.
DECADE CONTROL
Microprocessor assisted decade control allows for continual
use of one decade with full carry and borrow capability to
and from all more significant decades for easier use and
convenient manual operation. Monotonic and linear A/D
measurements can be made at any resolution using only
one decade control.
DISPLAY AND FRONT PANEL CONTROL
A user friendly 2-line 40 character display and six front panel
decade switches with full carry and borrow allow for fast
accurate voltage and current settings. Output settings can
be modified using the front panel decade switches and the
range keys. Output 2-wire, 4-wire are accomplished with
one keystroke or over GPIB/LAN. A crowbar function
places the output in a safe mode when desired. The 526
output can be set to 0 volts, allowing the output sense to
maintain a true 4-wire low impedance output.
RANGES AND RESOLUTION
The 526 provides four voltage ranges of 100mV, 1V, 10V
and 100V with a resolution of 100nV, 1μV, 10μV and 100μV
respectively. Two current ranges provide 10mA and 100mA
with a resolution of 10nA and 100nA respectively.
NON-VOLATILE MEMORY
Up to 32 storage output settings are provided with the 526,
that can be recalled at any time.
VOLTAGE, CURRENT AND COMPLIANCE LIMITS
Selecting voltage and current limits to prevent users from
damaging sensitive circuitry or devices under test may be
set from the front panel as well as a hardware compliance
voltage limit of 120V, 36V, 26V or 16V.
APPLICATIONS
The 526 is well suited for a variety of applications such as:
the design, check and calibration of high speed, high
resolution A/D converters; design and certification of high
speed data logging and process control systems; calibration
of digital voltmeters and multimeters; as an “IMBEDDED
STANDARD” and/or simulator; design, testing, simulation
and certification of thermocouples, strain gages and
transducer instrumentation. It is also a replacement for the
Analogic Model 8200.
Handleidingen type:
Gegevensblad
Pagina’s:
4
Grootte:
1.63 Mbytes (1711422 Bytes)
Taal:
english
Herziening:
3
Handleidingen-ID:
Datum:
2013 01 01
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2018 07 14
MD5:
187804a5ebb4b64efec8576e5936e676
Uploader:
Nandish
Downloads:
388