Tektronix WVR500 Analyzer
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Tektronix WVR500 ?
Als je nog andere handleidingen hebt voor de
Tektronix WVR500 kun je hier de bestanden uploaden .
Model:
WVR500
Datum:
Categorie:
Groep:
Omschrijving:
Waveform/Vector Monitor
Informatie
Product Description
The Tektronix WVR 500 is a half-rack wide, one rack unit high,
rasterizing television waveform/vector/picture monitor with NTSC
and PAL capability. Without a built-in display device, it outputs a
display signal that can be connected to a remote monitor or video
switcher.
Traditional applications for this monitor include areas of production,
postproduction, and transmission of television signals. Untraditional
applications include remote video monitoring of unmanned video
uplinks/downlinks and television transmitters.
Key Features
The WVR500 utilizes the following key features:
Rasterized output which can display the waveform/vector/picture
monitor displays simultaneously
Menu-assisted monitoring operation
Two channels of video inputs and two video outputs
Complete instrument operation possible through the RS-232
remote port
Amplitude alarm for the waveform display
Ability to store/recall four instrument setups
Adjustable signal and graticule display colors
Instrument calibration performed from the front panel
Universal Power supply automatically accommodating AC
supplies from 90–250 V, 50–60 Hz
Rasterized Display. The WVR 500 utilizes a proprietary rasterizer
which displays analog-like waveforms and vectors and the remote
monitor simultaneously with the appropriate measurement graticule.
The rasterized waveform and vector displays can fill the entire
display or be reduced to 1/4-screen sized windows over the picture
display. The reduced windows can be made transparent for complete
viewing of the picture display.
Menus. The WVR 500 menus use a combination of on-screen readout
and multi-use buttons, in conjunction with a general-purpose
adjustment knob, to control most of its monitoring functions.
RS–232 Port. The RS-232 remote connector enables remote
instrument operation. All front-panel controls and menu selections
can be operated through this port.
Alarm Mode. For the waveform monitor display only, there is an
Alarm mode which highlights any portion of the displayed signal
that exceeds the 100 IRE (1.0 V PAL) graticule line.
Calibration. The WVR 500 can be calibrated entirely from the front
panel after the movement of an internal jumper. Refer to the
WVR500 Waveform/Vector Monitor Service Manual for instructions
on how to calibrate the instrument.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
106
Grootte:
449.95 Kbytes (460747 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
070-8927-05
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2019 09 15
MD5:
b886f139ebb5ae2e7c2663375c37fde6
Downloads:
311
Informatie
Table of Contents
General Safety Summary ... .
Preface ... .
Getting Started
Product Description ... .
Accessories ... .
Installation ... .
Configuration ... .
Operating Basics
Functional Overview ... .
Front-Panel Controls ... .
Rear-Panel Connectors ... .
Special Operating Modes ... .
On-Screen Readout ... .
Using the Menus ... .
Menu System Overview ... .
Waveform and Vector Display Mode Menus ... .
Picture Display Mode Menus ... .
Waveform-in-Picture Display Mode Menus ... .
Making Measurements ... .
Waveform Graticules ... .
Making Waveform Measurements ... .
Vector Graticules ... .
Making Vector Measurements ... .
Tutorial ... .
Appendices
Appendix A: Specifications ... .
Appendix B: Remote Interface ... .
Equipment Requirements ... .
Remote Commands ... .
Appendix C: User Service ... .
Operational Jumpers ... .
Cleaning ... .
Instrument Options ... .
Handleidingen type:
Servicehandboek
Pagina’s:
124
Grootte:
984.19 Kbytes (1007810 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
070-8897-01
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2017 12 30
MD5:
da9be332311feb49dd59e3fcbf382687
Downloads:
469
Informatie
This manual provides servicing information for the WVR500
monitor. Material
found in this volume is targeted at the service technician;
detailed operating
information can be found in the WVR500 Waveform/Vector
Monitor User
Manual.
Service Level Supported. This manual supports only Module
Level (for module
exchange) servicing. Module Level servicing utilizes the
block diagram and its
descriptions to isolate a problem to the circuits on a
particular etched circuit
board.
Specific Content. Some of the information in this manual is
shared with the user
manual; however, the depth of the material depends on the
potential use. A quick
comparison will reveal that there are installation
instructions in both manuals,
along with specifications, servicing, and operating
instructions.
The operating instructions in the user manual are much more
detailed than those
in the service manual. The need for a service technician is
considerably less than
that of an end user. If the operating instructions in this
manual are not complete
enough, please refer to the user manual for more detailed
instructions.
The specifications contained in the Specifications section
of this manual should
be used by the servicing technician. The specification
tables contain step
numbers that cross reference to the Performance Verification
section step
numbers to make it possible to document the test methods
used to verify the
accuracy of the instrument.
Sections of this manual include the replaceable parts list,
troubleshooting
procedures, and removal and replace procedures needed to
isolate and replace
faulty modules. Replacement part ordering information can be
found in the
Replaceable Parts section of this manual.