Ameritec AM5XT 30-0033 Communications Test Set
Fabrikant:
Afbeelding 1 van 1
Als je nog andere foto's of handleidingen hebt voor de
Ameritec AM5XT 30-0033 kun je de bestanden hier uploaden .
Model:
AM5XT 30-0033
Datum:
1989
Categorie:
Groep:
Omschrijving:
Signaling Adaptor
Informatie
The AM5XT 30-0033 and 30-0033XT Signaling Adaptors are
packaged within the cover (lid) of
the AM5XT Voice/Data Transmission Test Set. These units
provide for Loop Start, Ground
Start, DID and Types I, II and III E&M signaling. Each unit
is powered externally by connection
to a 115VAC source and contains a selectable 24 or 48 volt
battery supply for emulating CO
operations.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
31
Grootte:
1.63 Mbytes (1708600 Bytes)
Taal:
english
Herziening:
C
Handleidingen-ID:
18-0023
Datum:
1997 08 01
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2017 10 14
MD5:
154c82526c2432041d9fb55f218d3c20
Downloads:
950
Informatie
The purpose of this document is to provide general
information and detailed operating
instructions for the Ameritec AM5XT 30-0033 and the
30-0033XT Signaling Adaptors. Included
are step-by-step procedures for setting up and operating the
unit on E&M, Ground Start, Loop
Start and DID circuits.
The document is intended to be used with the Model AM5XT and
AM5eXT Instruction Manual,
Part Number 18-0022 and the Model AM5XT and AM5eXT Test
Operating Procedures
document, Part Number 18-0119. The Test Operating Procedures
document is included in the
Instruction Manual and can also be purchased separately.
Refer to the Test Operating Procedures document for detailed
instructions for performing
transmission impairment tests once the connection has been
established with the
30-0033 or 30-0033XT Adaptor.
This document contains five sections. The first, General
Information, provides an overview of the
AM5XT 30-0033 and 30-0033XT Adaptors, the front panel
components and technical
specifications for each adaptor. All readers should review
this section before using either version
of the adaptor.
The second through fifth sections provide step-by-step
procedures for setting up each unit and
initiating or terminating calls on E&M, Ground Start, Loop
Start and DID circuits respectively.