Kikusui Electronics Corporation PBX20-10 Voeding
Fabrikant:
Afbeelding 1 van 3
Afbeelding 2 van 3
Afbeelding 3 van 3
Als je nog andere foto's of handleidingen hebt voor de
Kikusui Electronics Corporation PBX20-10 kun je de bestanden hier uploaden .
Model:
PBX20-10
Datum:
2003
Categorie:
Groep:
Omschrijving:
Bipolar Power Supply
Informatie
The PBX Series Bipolar Power Supplies are regulated power
supplies of a bipolar-type, featured by performance
reliability and safety. They employ a power Amplifier
system, thereby rendering advantageous features such as low
ripple noise, high stability, and rapid response.
Being a 4-mode type, they serve also as a source or a sink
of power, or as a booster of a function Generator. They are
microprocessor-based instruments and provide advanced
functions and ease of operation.
Each of them can operate either in a constant-voltage mode
(C. V mode) or in a constant-current mode (C.C mode),
mutually independently. This allows you to use them also as
a constant-current source or as a volt-age-controlled
current source.
You may remote-controlled them via an optional GPIB,
RS-232C, or MCB(Multi-channel Bus) Interface, thereby making
them applicable to various purposes. Typical applications
are for research systems in laboratories and for automatic
production and inspection lines in manufacturing plants.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
201
Grootte:
22.00 Mbytes (23069571 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Z1-002-532, IB002983
Datum:
2003 08 01
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2017 09 02
MD5:
ad470eeefd5abc942ccd23e8567f3117
Downloads:
3147
Informatie
This Operation manual is composed of seven chapters and
appendices as follows:
Chapter 1. GENERAL
Introduces an outline and features of the Power supply.
Chapter 2. PRECAUTIONS AND PREPARATIVE PROCEDURES
Describes the procedures for installation, AC input power
cable connection, power-on test, operation mode selection,
and load connection.
Chapter 3. OPERATING METHOD
The former half of this chapter introduces the names and
functions of keys, indicators and other panel items, and
describes the basic operation method of the power supply;
the latter half describes procedures for sequence operation
and applied types of operation.
Chapter 4. REMOTE PROGRAMMING
Describes the procedures to remote-control the Power supply
via an Interface board (optional) from an external controller.
Chapter 5. PANEL DESCRIPTION
Introduces the names of and describes the functions of the
switches and other items of the front and rear panels.
Chapter 6. MAINTENANCE AND CALIBRATION
Describes the maintenance, inspection, and calibration methods.
Chapter 7. SPECIFICATIONS
Gives tables of electrical specifications, mechanical
specifications, Accessories, and optional items.
APPENDICES
Provides an error message table, a troubleshooting chart, a
table of factory-de-faults, a menu configuration chart,
sequence coding sheets, and a table of ID codes for calibration.