Mirage Communication Equipment KP-2 / 10 Meter: Versterker
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Mirage Communication Equipment KP-2 / 10 Meter: ?
Als je nog andere handleidingen hebt voor de
Mirage Communication Equipment KP-2 / 10 Meter: kun je hier de bestanden uploaden .
Model:
KP-2 / 10 Meter:
Datum:
1996
Categorie:
Groep:
Omschrijving:
MAST-MOUNT GaAsFET PRE-AMPLIFIER
Informatie
This in-line GaAs-FET receive pre-amp provides high gain and
low noise
amplification for weak receive signals. The KP-2 also has
automatic RF-
switching, which disengages the pre-amp any time it detects a
transmission signal being emitted by the Transceiver.
The KP-2 pre-amp has an attenuator built into the circuit
which can be
selected by changing the position of a switch on the
internal circuit board.
This switch is set in the LOW level gain position at the
factory. This has
been included to prevent Receiver overloading and subsequent
intermodulation distortion that can come from very strong
signals.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
5
Grootte:
77.35 Kbytes (79205 Bytes)
Taal:
english
Herziening:
A
Handleidingen-ID:
Datum:
1996 01 01
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2017 08 19
MD5:
6438fa5e75844294b8e961b71d3cf28f
Downloads:
1608