Brookdeal 9503SC Versterker
Fabrikant:
Afbeelding 1 van 2
Afbeelding 2 van 2
Als je nog andere foto's of handleidingen hebt voor de
Brookdeal 9503SC kun je de bestanden hier uploaden .
Model:
9503SC
Datum:
Categorie:
Groep:
Omschrijving:
Precision Lock-in Amplifier
Informatie
The 9503 series is a family of Precision Lock-in Amplifiers
which incorporate circuitry and system innovations which
advance the state of the art and enable low level ac signals
to be accurately measured - even in extremely noisy
environments.
Six models are available. These differ in the response modes
available and the digital output facility. There are three
basic versions; the standard 9503 with the normal
(squarewave) response mode, the 9503C
which adds the
analogue correlation mode and the 9503SC
which in addition
to these two modes includes Sinetrac (fundamental only) mode
and digital correlation mode. The SC version also has the
signal gating facility. Each of these three versions is also
available with a digital display and BCD output -these
models carrying the suffix ’D’.
Both the Sinetrac and analogue correlation modes are based
on new pulse carrier modulation techniques*. These
facilities either match the instrument response to the
signal energy frequencies, even for complex waveforms, or
suppress all harmonics to give a ’’fundamental only"
response. When harmonic suppression is wanted, or when
operating at low frequencies (<lkHz), these options will
greatly extend conventional lock-in performance with
convenient operation. Further details on all of these
response modes are given in the detailed operating
instructions in section 5.4 and in greater detail in various
Technical Notes available on request.
All the 9503 versions have excellent dynamic reserve and
output stability - optimised by mode switching pushbuttons -
so that it is very suitable for applications when the signal
recovery power of a system has to be stretched to the very
limit as well as for those applications where the
measurement demands extreme precision.
When the frequency range of operation has to be extended,
the extra bandwidth options make such measurements possible
-wide band and without range or circuit card changes. All
the necessary Interface requirements are incorporated to
build up the system capability by means of the range of
slot-in modules. These can be fitted as specific
applications requirements develop.
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
103
Grootte:
11.74 Mbytes (12310552 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
2017 05 26
MD5:
9fd52deeac27bdcd30c8815e66de9778
Downloads:
4266
Informatie
1 introduction 1
2 specification 2
3 basic operating instructions 9
4 system description 15
5 facilities & detailed operating instructions 21
5.1 power 21
5.2 checks using the function 21 check facility
5.3 signal channel 25
5.4 response modes 33
5.5 reference channel 38
5.6 demodulator and output 41
5.7 option Oscillator 5012F 47
5.8 option omniphase 5042 48
5.9 option ratiometer 5047 49
5.10 option noise measurement 50 unit 5049
5.11 option installation 51 instructions
5.12 points to watch 52
5.13 options, mod 10, 11, 13, 14 54
6 fault finding guide 56
7 parts list 65 circuit diagrams