Tektronix 115 Generator
Fabrikant:
Afbeelding 1 van 2
Afbeelding 2 van 2
Als je nog andere foto's of handleidingen hebt voor de
Tektronix 115 kun je de bestanden hier uploaden .
Model:
115
Datum:
1968
Categorie:
Groep:
Omschrijving:
Pulse Generator
Informatie
General
The Type 115 Pulse Generator is a multi-purpose instrument
which generates pulses with a variety of controllable
characteristics. It has a maximum repetition rate of 10 MHz,
a maximum amplitude of ±10 volts and a minimum risetime and
falltime of 10 ns. Those pulse characteristics which are
controllable are: the repetition rate, width, amplitude,
risetime, falltime, DC offset and polarity. Its five modes
of operation include on undelayed pulse, a delayed pulse
(with a calibrated delay), paired pulses, an externally
triggered burst of pulses and an externally gated burst of
pulses. In addition to the output pulse, there is an
undelayed and a delayed trigger output.
The following specifications are valid for instruments
operated at an ambient temperature of from 0°C to +50°C
after an initial warm-up period of 20 minutes, when
previously calibrated at a temperature of +25°C ±5°C.
Section 5, Performance Check and Calibration Procedure,
gives a procedure for checking and adjusting the Type 115
with respect to the following specification.
Type 115 Mod 146B
This manual also pertains to the Type 115 Mod 146B. The Type
115 Mod 146B is identical to the standard Type 115 except
that it is shipped without o cabinet and with a coiled,
detachob'e power cord (Tektronix Part No. 161-0031-00) and
power cord connector receptical (Tektronix Port No.
331-0102-00). See Section 9 for rackmounting instructions.
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
137
Grootte:
22.25 Mbytes (23332535 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
070-0786-00
Datum:
1968 01 01
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2017 04 23
MD5:
452bb16606b2f4e6b23ecdd8b7e856cc
Downloads:
809
Informatie
Specification
Operating Insructions
Circuit Description Maintenance
Performance Check and Calibration Procedure
Abbreviations and Symbols
Parts Ordering Information
Electrical Parts List
Mechanical Parts List Information
Mechanical Parts List
Diagrams
Mechanical Parts List Drawings Accessories
Mod 146B and Rackmounting