Apparatuur informatie:

BK Precision 4007DDS Generator
Fabrikant:
BK Precision
Model: 4007DDS
Datum:
Categorie: Meetinstrumenten
Groep: Generator
Beschrijving: 7 MHz Sweep Function Generator
Informatie:
                                    The Model 4007DDS is a versatile, high performance function
generator. Implemented using advance digital technologies
based on DDS topology, the units generates superb quality
waveforms with high precision and stability.
It provides sine & square wave outputs over the frequency
range from 0.1 Hz to 7 MHz in one extended range
(triangle/ramped wave outputs to 100KHz).
An auxiliary TTL output at the generator frequency is
available to synchronize external devices. The output
voltage can be varied from 0V to 10V peak-to-peak into 50
ohms or to 20V into open circuit. A front panel pushbutton
can attenuate the output by 20 dB. The DC level of the
output can be adjusted using the offset control.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Handleidingen Type: Gebruikershandleiding BKPrecision-8531-Manual-Page-1-Picture
Pagina's: 14
Maat: 105.85 Kbytes (108387 Bytes)
Taal: Engels
Herziening van:
Manual-ID/Number:
Datum:
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: c0cbb21beb59771d1e61f3357237e121
Downloads: 73 Sinds 25 januari 2017
Informatie:
Section 1 Introduction
1.2
DESCRIPTION....................................................................................................................5
1.3
SPECIFICATIONS..............................................................................................................5
1.4 TECHNICAL
SUPPORT..................................................................................................6
Section 2 Installation
2.1
INTRODUCTION...............................................................................................................7
2.3 INSTRUMENT
MOUNTING............................................................................................7
2.4 POWER
REQUIREMENTS...............................................................................................7
2.5 GROUNDING
REQUIREMENTS....................................................................................7
2.7 ACCEPTANCE
CHECK....................................................................................................8
Section 3 Operating Instructions
3.1 CONTROLS AND
CONNECTORS.................................................................................9
3.2 INSTRUMENT INPUTS AND
OUTPUTS....................................................................10
3.4 FIRST TIME
OPERATION...............................................................................................10
3.5 DETAILED OPERATING
INSTRUCTIONS.................................................................11
BKPrecision-8531-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics