Telecommunications Techniques Corporation T-BERD T1 Ander
Fabrikant:
Model:
T-BERD T1
Datum:
1994
Categorie:
Groep:
Omschrijving:
Repeater Extender

Informatie

The T-BERD T1 Repeater Extender is a hand-held circuit card extender packaged in a rugged plastic case, which provides easy test access toTl signals at span repeater housings. The T-BERD T1 Repeater Extender is designed to work in conjunction with a T-Berd 107 107A, 209,209A, or 211 T-Carrier Analyzer to perform out-of-service testing or monitoring of T1 signals along repeatered spans. Through the use of switches and jacks, the T-BERD T1 Repeater Extender enables you to monitor T1 signals at repeater inputs and outputs without disrupting the simplex current. The T-BERD T1 Repeater Extender also further sectionalizes span lines by performing signal loopbacks at the repeater and by terminating repeater outputs. 1.3 STANDARD FEATURES Four test access jacks permit monitoring of test signals at the input and output of T1 repeaters. These jacks also provide direct access to the T1 span for Time Domain Reflectometer (TDR) and DC testing. SIGNAL and CURRENT path switches enable the T-BERD T1 Repeater Extender to perform signal and current loopbacks at span repeater housings. The TRANSMIT switch terminates the SIDE 1 or SIDE 2 output of a repeater with a 100-ohm load and allows test signal insertion at any span repeater location without affecting the simplex current. SIDE 1 and SIDE 2 CURRENT SENSE TEST POINTS provide access for an external volt-ohmmeter.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
42
Grootte:
4.15 Mbytes (4353502 Bytes)
Taal:
english
Herziening:
B
Handleidingen-ID:
ML11357
Datum:
1994 02 01
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2017 01 15
MD5:
4e23d12cf252a7a238b853e053d9c4d6
Downloads:
508

Informatie

GENERAL INFORMATION ... 1-1 1.1 INTRODUCTION ... 1-1 1.2 INSTRUMENT OVERVIEW ... 1-1 1.3 STANDARD FEATURES ... 1-1 INSTRUMENT CHECKOUT AND MAINTENANCE ... 2-1 2.1 UNPACKING ... 2-1 2.2 EQUIPMENT INCLUDED ... 2-1 2.3 WARNINGS AND CAUTIONS ... 2-1 2.4 WARRANTY POLICY ... 2-2 2.5 IN-WARRANTY SERVICE ... 2-2 2.6 OUT-OF-WARRANTY SERVICE ... 2-3 2.7 EQUIPMENT RETURN INSTRUCTIONS ... 2-3 INSTRUMENT DESCRIPTION ... 3-1 3.1 INTRODUCTION ... 3-1 3.2 TEST SETUP ... 3-1 3.3 TEST CONNECTIONS ... 3-6 OPERATION ... 4-1 4.1 INTRODUCTION ... 4-1 4.2 MONITORING SIGNALS AT THE REPEATER ... 4-1 4.3 SIGNAL LOOPBACKS AT SPAN REPEATERS ... 4-4 4.4 TERMINATING REPEATER OUTPUTS ... 4-7 4.5 TRANSMITTING TEST SIGNALS FROM SPAN REPEATERS ... 4-10 4.6 LOOPING SIMPLEX CURRENT AT SPAN REPEATERS ... 4-12 4.7 MEASURING SIMPLEX CURRENT ... 4-14 4.8 PERFORMING TDR AND DC TESTS ... 4-17 SPECIFICATIONS ... 5-1 5.1 GENERAL SPECIFICATIONS ... 5-1 5.2 INPUT SPECIFICATIONS ... 5-1 5.3 REPEATER TYPES ... 5-2 5.4 GROUNDING ... 5-2 3-1 T-BERD T1 REPEATER EXTENDER ... 3-2 3-2 TEST SWITCH T1 TESTING MODES ... 3-3 3-3 TRANSMIT SWITCH CONFIGURATIONS ... 3-5 3-4 SIGNAL PATH SWITCH CONFIGURATIONS ... 3-7 3-5 CURRENT PATH SWITCH CONFIGURATIONS ... 3-8 4-1 MONITORING SIGNALS ... 4-2 4-2 SIGNAL LOOPBACKS ... 4-6 4-3 TERMINATING REPEATER OUTPUTS ... 4-8 4-4 TRANSMITTING TEST SIGNALS ... 4-11 4-5 LOOPING SIMPLEX CURRENT ... 4-13 4-6 MEASURING SIMPLEX CURRENT ... 4-16 4-7 TDR MEASUREMENTS TEST ... 4-18

toon meer