Apparatuur informatie:

Telecommunications Techniques Corporation 42522 Interface
Fabrikant:
Telecommunications Techniques Corporation
Model: 42522
Datum: 1997
Categorie: Meetinstrumenten
Groep: Interface
Beschrijving: V.35/RS-449/X.21 COMBINED DATA INTERFACE MODULE
Informatie:
                                    The V.35/RS-449/X.21 Combined Data Interface Module gives
the FIREBERD 6000 and FIREBERD 4000 the ability to test from
a V.35, RS-449, or X.21 access point with the same module.
This module does all of the following:
• Performs Bit Error Rate (BER) testing on data links that
are out of service.
• Emulates Data Transmission Equipment (DTE) or Data
Communications Equipment (DCE).
• Performs V.54 (in V.35 mode) loopbacks 2 and 3, RS-449
loopbacks RL and LL, and X.21 loopbacks 2b and 3c.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Handleidingen Type: Gebruikershandleiding TTC-8379-Manual-Page-1-Picture
Pagina's: 52
Maat: 1.68 Mbytes (1761000 Bytes)
Taal: Engels
Herziening van: B
Manual-ID/Number: 50-12650-01
Datum: 01 november 1997
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: a903956fb89a3fd82d79fd4269c4e900
Downloads: 59 Sinds 09 januari 2017
Informatie:
1 GENERAL INFORMATION
............................................................................-----------
1-1
1.1 Manual
Summary--------------------------------------------------------------------------------------------------I-1
1.2 Module Overview
--------------------------------------------------------------------------------------------------M
1.3 Interface
Compatibility--------------------------------------------------------------------------------------------l-l
1.4 Cables
----------------------------------------------------------------------------------------------------------------1-2
2 INTERFACE DESCRIPTION
..................................................--------..............................2-1
2.1
Introduction----------------------------------------------------------------------------------------------------------------------2-1
2.2 Physical
Description----------------------------------------------------------------------------------------------2-1
2.2.1 V.35 Interface
Connector------------------------------------------------------------------------------------
2-1
2.2.2 SRS-449 Interface
Connector--------------------------------------------------------------------------------2-2
2.2.3 X.21 Interface
Connector------------------------------------------------------------------------------------2-3
3 INSTALLATION AND OPERATION - -
-...............................................................................3.1
3.1
Introduction---------------------------------------------------------------------------------------------------------3-1
3.2 Installing The Interface
Module---------------------------------------------------------------------------------3-1
3.3 Configuring The Module For FIREBERD
Operation------------------------------------------------------3-2
3.3.1 Interface Set-up
Review-----------------------------------------------------------------------------------------3-2
3.4 FIREBERD 6000 Mainframe
Configurations----------------------------------------------------------------3-3
3.4.1 FIREBERD 6000 Self
Loop---------------------------------------------------------------------------------3-4
3.4.2 FIREBERD 6000 Error
Insert---------------------------------------------------------------------------------3-4
3.4.3 FIREBERD 6000 Generator
Clock--------------------------------------------------------------------------3-4
3.4.3.1 V.35/306 Interface - V.35 Mode DTE
Emulation-------------------------------------------------------3-4
3.4.3.2 V.35/306 Interface - 306 Mode DTE
Emulation--------------------------
--------------------------- - 3-4
3.4.3.3 V.35/306 Interface - V.35 Mode DCE
Emulation...................................................-..............-
- 3-5
3.4.3.4 V.35/306 Interface - 306 Mode DCE
Emulation---------------------------------------------------------3-5
3.4.3.5 RS-449 Interface - DTE Emulation
------------------------------------------------------------------------3-6
3.4.3.6 RS-449 Interface - DCE
Emulation------------------------------------------------------------------------3-6
3.4.3.7 X.21 Interface - DTE
Emulation----------------------------------------------------------------------------3-7
3.4.3.8 X.21 Interface - DCE
Emulation----------------------------------------------------------------------------3-7
3.4.4 FIREBERD 6000
Timing-------------------------------------------------------------------------------------3-8
3.4.5 FIREBERD 6000 Recall/Store
-------------------------------------------------------------------------------3-8
3.4.6 FIREBERD 6000
Data-----------------------------------------------------------------------------------------3-8
3.4.7 FIREBERD 6000 RLSD (RR)/RTS/Loop Up
------------------------------------------------------------3-8
3.4.8 FIREBERD 6000 DSR (DM)/DTR/Loop
Down----------------------------------------------------------3-8
3.5 FIREBERD 4000 Mainframe
Configurations----------------------------------------------------------------3-9
3.5.1 FIREBERD 4000 Self
Loop----------------------------------------------------------------------------------3-9
3.5.2 FIREBERD 4000 Generator
Clock----------------------------------------------------------------------3-10
3.5.2.1 V.35/306 Interface - V.35 Mode DTE
Emulation-----------------------------------------------------3-10
3.5.2.2 V.35/306 Interface - 306 Mode DTE
Emulation-------------------------------------------------------3-10
3.5.2.3 V.35/306 Interface - V.35 Mode DCE
Emulation-----------------------------------------------------3-10
3.5.2.4 V.35/306 Interface - 306 Mode DCE
Emulation-------------------------------------------------------3-11
3.5.2.5 RS-449 Interface - DTE Emulation
--------------------------------------------------------------------3-11
3.5.2.6 RS-449 Interface - DCE
Emulation---------------------------------------------------------------------3-12
3.5.2.7 X.21 Interface - DTE
Emulation-------------------------------------------------------------------------3-12
3.5.2.8 X.21 Interface - DCE
Emulation--------------------------------------------------------------------------3-13
3.5.3 FIREBERD 4000
Pattern-------------------------------------------------------------------------------------3-13
3.5.4 FIREBERD 4000 Setup
Summary-------------------------------------------------------------------------3-13
3.6 FIREBERD 6000 And 4000 Dedicated
Results-------------------------------------------------------------3-14
3.6.1 FIREBERD 6000
Results-------------------------------------------------------------------------------------3-14
3.6.2 FIREBERD 4000
Results-------------------------------------------------------------------------------------3-14
4 INDICATORS, ERROR MESSAGES, AND
PRINTS................................... - - -............-
- 4-1
4.1
Introduction----------------------------------------------------------------------------------------------------.
-. . 4_]
4.1.1 Status Indicators and Error
Messages-----------------------------------------------------------------------4-1
4.1.2 FIREBERD 6000 Status Indicators and Error Messages
-----------------------------------------------4-1
4.1.3 FIREBERD 4000 Status Indicators and Error Messages
------------------------------------------------4-1
4.2 FIREBERD 6000 Status, Controls, And Results
Prints------------------------------------------------------4-2
4.2.1 FIREBERD 6000 Status Prints
-------------------------------------------------------------------------------4-2
4.2.2 FIREBERD 6000 Controls
Prints------------------------------------------------------------------------------4-2
4.2.3 FIREBERD 6000 Results Prints
------------------------------------------------------------------------------4-3
4.3 FIREBERD 4000 Status, Controls, And Results
Prints-----------------------------------------------------4-4
4.3.1 FIREBERD 4000 Status Prints
--------------------------------------------------------------------------------4-4
4.3.2 FIREBERD 4000 Controls
Prints------------------------------------------------------------------------------4-4
4.3.3 FIREBERD 4000 Results Prints
-----------------------------------------------------------------------------4-5
SECTION DESCRIPTION PAGE
5 REMOTE CONTROL COMMAND SYNTAX
------------..........-................-................5-1
5.1
Introduction----------------------------------------------------------------------------------------------------------5-1
5.1.1 FIREBERD 6000 and 4000 Remote Control Command Syntax
---------------------------------------5-1
5.1.2 FIREBERD 6000 Remote Control Command
Syntax---------------------------------------------------5-1
5.1.3 FIREBERD 4000 Remote Control Command Syntax
----------------------------------------------------5-2
5.2 Print
Capability-----------------------------------------------------------------------------------------------------5-2
6
APPLICATIONS.................................................................................................................6-1
6.1
Introduction----------------------------------------------------------------------------------------------------------6-1
6.1.1 Network
Testing--------------------------------------------------------------------------------------------------6-1
6.1.2 Component
Testing-----------------------------------------------------------------------------------------------6-1
6.2 Troubleshooting
Guide------------------------------------------------------------------------------------------
6-2
7 MODULE
SPECIFICATIONS........................................................................................
- - - - 7-1
7.1
Introduction------------------------------------------------------------------------------------------------
7.1.1 V.35/306 Interface Specifications
---------------------------------------------------------------------------7-1
7.1.2 RS-449 Interface
Specifications-------------------------------------------------------------------------------7-1
7.1.3 X.21 Interface
Specifications-----------------------------------------------------------------------------------7-2
7.2
Dimensions------------------------------------------------------------------------------------------------------------7-3
8 MAINTENANCE AND
SERVICE..................................-.....................8-1
8.1
Introduction---------------------------------------------------------------------------------------------------------8-1
8.2 Maintenance
---------------------------------------------------------------------------------------------------------8-1
8.2.1 In Case of Difficulty
---------------------------------------------------------------------------------------------8-1
8.3
Service----------------------------------------------------------------------------------------------------------------8-1
8.3.1 Warranty Policy
--------------------------------------------------------------------------------------------------8-1
8.3.2 In-Warranty
Service----------------------------------------------------------------------------------------------
8-2
8.3.3 Out-of-Warranty Service
--------------------------------------------------------------------------------------8-2
8.3.4 Equipment Return Instructions
--------------------------------------------------------------------------------8-2
2-1 V.35 Connector Pin Assignments
--------------------------------------------------------------------------2-1
2-2 RS-449 Connector Pin
Assignments----------------------------------------------------------------------
- 2-2
2-3 X.21 Connector Pin Assignments
-------------------------------------------------------------------------2-3
3-1 Interface Set-up
Review---------------------------------------------------------------------------------------3-2
2-1 V.35/RS-449/X.21 Combined Data Interface Module - Front
View----------------------------------2-1
3-1 FIREBERD Interface Installation
--------------------------------------------------------------------------3-1
3-2 FIREBERD 6000 User
Interface----------------------------------------------------------------------------3-3
3-3 FIREBERD 4000 User
Interface----------------------------------------------------------------------------3-9
4-1 FIREBERD 6000 Controls
Print----------------------------------------------------------------------------4-2
4-2 FIREBERD 6000 Results
Print------------------------------------------------------------------------------4-3
4-3 FIREBERD 4000 Controls
Print----------------------------------------------------------------------------4-4
4-4 FIREBERD 4000 Results
Print-------------------.----------------------------------------------------------4-5
6-1 Network
Testing----------------------------------------------------------------------------------------------6-1
6-2 Component
Testing-----------------------------------------------------------------------------------------6-1
TTC-8379-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics