Telecommunications Techniques Corporation 41400 Interface
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Telecommunications Techniques Corporation 41400 ?
Als je nog andere handleidingen hebt voor de
Telecommunications Techniques Corporation 41400 kun je hier de bestanden uploaden .
Model:
41400
Datum:
1999
Categorie:
Groep:
Omschrijving:
RS-449/530/MIL DATA INTERFACE
Informatie
The RS-449/530/MIL Data Interface has the following features.
• Compatible with RS-449, MIL-188-114, EIA-530, and MIL-188C
standards.
• Emulate DTE or DCE.
• Circuit connections using either the 25-pin D-type, 37-pin
D-type, or twinax connectors.
• Operates in balanced or unbalanced Interface mode.
• User selectable terminating impedance.
• Test in synchronous timing up to 15 Mb/s.
• Test in asynchronous timing up to 20 kb/s.
• Test in recovered timing up to 520 kb/s. (FIREBERD 6000
with clock recovery option.)
• Controlled through the FIREBERD front panel Interface
Setup menu or by remote control.
• Control RL and LL lines while emulating DTE and TM and CTS
lines while emulating DCE.
• Select ground termination technique on receive clock and
receive data lines.
• Set the polarity of all Interface signaling control leads.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
62
Grootte:
180.94 Kbytes (185285 Bytes)
Taal:
english
Herziening:
B
Handleidingen-ID:
50-14279-01
Datum:
1999 06 01
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2017 01 09
MD5:
c0e1285c27e780b7658df0efbb4d2cc5
Downloads:
516
Informatie
1.0 GENERAL
INFORMATION ...
1
1.1
INTRODUCTION ... 1
1.2 SAFETY
CONSIDERATIONS ... 1
1.3 ENVIRONMENTAL
CONSIDERATIONS ... 1
1.4 Interface
FEATURES ... 1
1.5 Interface
CAPABILITY ... 2
1.6 OPTIONS AND
ACCESSORIES ... 2
2.0 Interface DESCRIPTION
...
3
2.1 INTRODUCTION
...
3
2.2 PHYSICAL DESCRIPTION REQUIREMENTS
...
3
2.3 FUNCTIONAL DESCRIPTION
...
5
2.4 MAINFRAME OPERATION WITH THE RS-449/530/MIL
INTERFACE ... 7
3.0 Fireberd 4000 INSTALLATION AND
OPERATION ... 11
3.1
INTRODUCTION ... 11
3.2 INSTALLING THE
INTERFACE ... 11
3.3 Fireberd 4000 Interface
SET-UP ... 12
3.4 Fireberd 4000 ANALYSIS
RESULTS ... 20
3.5 Fireberd 4000 SELF-LOOP
TEST ... 21
3.6 Interface STATUS INDICATORS AND SWITCHES
...
21
3.7 Fireberd 4000 PRINTER OPERATION
...
21
3.8 Fireberd 4000 REMOTE CONTROL
COMMANDS ... 23
4.0 Fireberd 4000 APPLICATIONS
...
25
4.1 INTRODUCTION
...
25
4.2 SYNCHRONOUS
TESTING ... 25
4.3 ASYNCHRONOUS TESTING
...
30
5.0 FIREBERD 6000 INSTALLATION AND
OPERATION ... 33
5.1 INTRODUCTION
...
33
5.2 INSTALLING THE Interface
...
33
5.3 FIREBERD 6000 MAINFRAME
SET-UP ... 34
5.4 FIREBERD 6000 Interface
SET-UP ... 34
5.5 FIREBERD 6000 ANALYSIS RESULTS
...
39
5.6 FIREBERD 6000 SELF LOOP TEST
...
41
5.7 Interface STATUS INDICATORS AND SWITCHES
...
41
5.8 FIREBERD 6000 PRINTER OPERATION
...
41
5.9 Fireberd 4000 REMOTE CONTROL
COMMANDS ... 42
6.0 FIREBERD 6000 APPLICATIONS
...
43
6.1 INTRODUCTION
...
43
6.2 SYNCHRONOUS
TESTING ... 43
6.3 ASYNCHRONOUS TESTING
...
47
7.0 Interface
SPECIFICATIONS ... 51
7.1 INTRODUCTION
...
51
8.0 MAINTENANCE AND SERVICE
...
53
8.1 INTRODUCTION
...
53
8.2 MAINTENANCE
...
53
8.3 SERVICE
...
53
APPENDIX A RS-449/530/MIL DATA Interface FACTORY DEFAULTS
... 55