Telecommunications Techniques Corporation DS3 Interface
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Telecommunications Techniques Corporation DS3 ?
Als je nog andere handleidingen hebt voor de
Telecommunications Techniques Corporation DS3 kun je hier de bestanden uploaden .
Model:
DS3
Datum:
1993
Categorie:
Groep:
Omschrijving:
Interface Module
Informatie
The DS3 Interface Module gives the FIREBERD 6000 and
FIREBERD4000Communications Analyzers the ability to test
circuits and equipment operating at the DS3 rate of 44.736
Mb/s. This Module does all of the following:
• operates in unframed, Ml3, and C-bit parity environments
• monitors DS3 signals using frame errors, Bipolar
Violations (BPVs), and parity results
• performs full Bit Error Rate Testing (BERT) on DS3s that
are out-of-service
• transmits and monitors Far End Alarm Control Codes (FEAC)
sequences (e.g., alarm conditions and loopbacks)
• inserts logic errors, frame errors, and BPVs on live
traffic or test patterns. Logic errors and/or BPVs can be
inserted singly or at programmable rates; frame errors can
be inserted consecutively, to a maximum of 15.
1.3 INTERFACE COMPATIBIÜTY
The DS3 Interface Module complies with the following
publications and specifications:
• Bell Publication CB119 — Interconnection Specification for
Digital Cross-Connects
• ANSI Specification Tl.404
• CCITT 44.736 MB/S RECOMMENDATIONS — APPLICABLE SECTIONS OF
G.703
Handleidingen type:
Gebruikershandleiding
Pagina’s:
65
Grootte:
2.51 Mbytes (2635636 Bytes)
Taal:
english
Herziening:
A
Handleidingen-ID:
ML12029
Datum:
1993 03 01
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2017 01 08
MD5:
2bba231e09c16bc056f260eff13daa74
Downloads:
644
Informatie
1.0 GENERAL
INFORMATION ... 1
1.1 MANUAL
SUMMARY ... 1
1 1.2 DS3 Interface MODULE
OVERVIEW ... 1
i 1.3 INTERFACE
COMPATIBILITY ... 1
1.4
CABLES ... , ... 1
| 2.0 PHYSICAL
DESCRIPTION ... 3
2.1 INTRODUCTION
... 3
1 2.2 PHYSICAL
DESCRIPTION ... 3
I 2.3 FUNCTIONAL DESCRIPTION
... 4
. 2.4 SELF-LOOP
OPERATION ... 4
I 3.0 FIREBERD 6000 INSTALLATION AND
OPERATION ... 5
fc 3.1
INTRODUCTION ... 5
3.2 INSTALLING THE
INTERFACE ... 5
I 3.3 CONFIGURING THE DS3 Interface MODULE FOR FIREBERD 6000
OPERATION ... 6
! 3.4 THE DS3 Interface MODULE SET-UP
MENU ... 6
3.5 FIREBERD 6000 TEST
RESULTS ... 11
3.6 INTERFACE STATUS
INDICATORS ... 15
3.7 FIREBERD 6000 PRINTER
OPERATION ... 15
3.8 FIREBERD 6000 REMOTE CONTROL
COMMANDS ... 17
4.0 FIREBERD 6000 APPLICATIONS
... 19
4.1
INTRODUCTION ... 19
4.2 IN-SERVICE MONITORING
... 19
4.3 OUT-OF-SERVICE
TESTING ... 23
5.0 FIREBERD 4000 INSTALLATION AND OPERATION
... 33
5.1
INTRODUCTION ... 33
5.2 INSTALLING THE
INTERFACE ... 33
5.3 CONFIGURING THE DS3 Interface MODULE FOR FIREBERD 4000
OPERATION ... 34
5.4 THE DS3 Interface MODULE SET-UP
MENU ... 34
5.5 FIREBERD 4000 TEST RESULTS
... 40
5.6 INTERFACE STATUS
INDICATORS ... 43
5.7 FIREBERD 4000 PRINTER
OPERATION ... 43
5.8 FIREBERD 4000 REMOTE CONTROL COMMANDS
... 44
6.0 FIREBERD 4000
APPLICATIONS ... 47
6.1
INTRODUCTION ... 47
6.2 IN-SERVICE
MONITORING ... 47
6.3 OUT-OF-SERVICE
TESTING ... 51
7.0
SPECIFICATIONS ... ; ... 59
7.1
INTRODUCTION ... 59
8.0 MAINTENANCE AND SERVICE
... ,, ... 61
8.2 MAINTENANCE
... - ... 61
8.3
SERVICE ... 61
APPENDICIES
APPENDIX A FACTORY DEFAULT SETTINGS ...
APPENDIX B M13 AND C-BIT FRAMING FORMATS