Kepco SN 488-122 Ander
Fabrikant:
Afbeelding 1 van 2
Afbeelding 2 van 2
Als je nog andere foto's of handleidingen hebt voor de
Kepco SN 488-122 kun je de bestanden hier uploaden .
Model:
SN 488-122
Datum:
1979
Categorie:
Groep:
Omschrijving:
DIGITAL PROGRAMMER
Informatie
The Kepco Series SN 488 and SN 500 Digital Programmers make
it possible to control the output of a suitable Power supply
by means of digital input signals. The SN Programmer is used
as the Interface between a digital data bus and the d-c
Power supply to be programmed. The SN programmers accept
digital data from the data bus and convert this data to an
analog voltage output, which serves as the control signal
input for the d-c Power supply (See Fig. 1-2). in response
to the control signal, the d-c Power supply is programmed to
the magnitude initially commanded by the data bus controller.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
30
Grootte:
1.09 Mbytes (1138786 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2015 08 14
MD5:
d1ffb3e38e08f949f45f7a42a5221751
Downloads:
584
Informatie
This manual contains instructions for the installation,
operation and maintenance of the Series SN 488 and SN 500
Digital Programmers.