Kepco SN 500 SERIES Ander
Fabrikant:
Model:
SN 500 SERIES
Datum:
2000
Categorie:
Groep:
Omschrijving:
DIGITAL PROGRAMMER

Informatie

The Kepco Series SN 488 and SN 500 Digital Programmers make it possible to control the output of a suitable Power supply by means of digital input signals. The SN Programmer is used as the Interface between a digital data bus and the d-c Power supply to be programmed. The SN programmers accept digital data from the data bus and convert this data to an analog voltage output, which serves as the control signal input for the d-c Power supply (See Fig. 1-2). In response to the control signal, the d-c Power supply is programmed to the magnitude initially commanded by the data bus controller.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
25
Grootte:
935.90 Kbytes (958360 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2015 08 14
MD5:
583530f7e5f0d7e995cf975b641e414b
Downloads:
1135

Informatie

This manual contains instructions for the installation, operation and maintenance of the Series SN 488 and SN 500 Digital Programmers.

toon meer