Kepco SN 488 Series Ander
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Kepco SN 488 Series ?
Als je nog andere handleidingen hebt voor de
Kepco SN 488 Series kun je hier de bestanden uploaden .
Model:
SN 488 Series
Datum:
2000
Categorie:
Groep:
Omschrijving:
DIGITAL PROGRAMMER
Informatie
The Kepco Series SN 488 and SN 500 Digital Programmers make
it possible to control the output of a suitable Power supply
by means of digital input signals. The SN Programmer is used
as the Interface between a digital data bus and the d-c
Power supply to be programmed. The SN programmers accept
digital data from the data bus and convert this data to an
analog voltage output, which serves as the control signal
input for the d-c Power supply (See Fig. 1-2). In response
to the control signal, the d-c Power supply is programmed to
the magnitude initially commanded by the data bus controller.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
25
Grootte:
935.90 Kbytes (958360 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2015 08 14
MD5:
583530f7e5f0d7e995cf975b641e414b
Downloads:
1135
Informatie
This manual contains instructions for the installation,
operation and maintenance of the Series SN 488 and SN 500
Digital Programmers.