Apparatuur informatie:

Fluke 2620A/05 Ander
Model: 2620A/05
Datum: 2002
Categorie: Meetinstrumenten
Groep: Ander
Beschrijving: Data Acquisition Unit
                                    The 2620A Hydra Series II Data Acquisition Unit is a
multi-channel data acquisition unit able to measure ac and
dc voltages, temperature via thermocouples and RTDs,
resistance, and frequency. It features 21 measurement
channels, 8 digital input/output lines, a Totalizer input,
and 4 alarm output lines. The Data Acquisition Unit is
easily carried by hand and can be ac or dc powered. The user
can choose communications with a host computer over an
RS-232 (standard) or IEEE-488 (2620A/05) computer interface.

The 2620A comes with a removable Universal Input Module that
enables fast, convenient set-up and reconfiguration. Any
combination of dc voltage, ac voltage, thermocouple, RTD,
resistance, or frequency measurements can be connected to
the input module without the need for additional signal
conditioning. Thermocouple reference junction compensation
is automatically performed by sensing the temperature of the
input module's isothermal block.


    Channel Scanning: can be continuous scanning, scanning
at an interval time, single scans, or triggered (internal or
external) scans
    Channel Monitoring: make measurements on a single
channel and view these measurements on the display
    Channel Scanning and Monitoring: view measurements made
for the monitor channel while scanning of all active
channels continues
    Multi-Function Display: Left (numeric) display shows
measurement readings; also used when setting numeric
parameters; Right (alphanumeric) display used for numeric
entries, channel number selection and display, status
information, and operator prompts
    Front-Panel Operation
    Measurement Input Function and Range:
     Volts dc (Vdc), dc voltage ranges 300 mV, 3 V, 30 V, 300 V
     Volts ac (Vac), ac voltage ranges 300 mV, 3 V, 30 V, 300 V
     Frequency (Hz), 15 Hz to 1 MHz
     Resistance (Ω), resistance ranges: 300 Ω, 3 kΩ, 30 kΩ,
300 kΩ, 3 MΩ, 10 MΩ
    Temperature Measurement: Thermocouple types J, K, E, T,
N, R, S, and B, and Hoskins Engineering Co. type C are
supported. Also, DIN/IEC 751 Platinum RTDs are supported
    Totalize Events on the Totalizing Input
    Alarm Limits and Digital Output Alarm Indication
    4-Terminal Resistance Measurements (Channels 1 through
10 only)
    RS-232 Computer Interface Operation
    Measurement Rate Selection
    Nonvolatile Memory: Storage of minimum, maximum, and
most recent measurements for all scanned channels. Storage
of Computer Interface setup, channel configurations, and
calibration values.
    RS-232 interface (IEEE-488 available with option 05)
    90 to 264 Vac, 50 or 60 Hz operation; or 9.0 to 16 Vdc
    Weight: 7 lb; Size: 93 mm (3.67 in)H x 216 mm (8.5 in)W
x 312 mm (12.3 in)D

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Fluke -- 2620A/05 -- Gegevensblad
File name: Fluke-6511-Manual-Page-1-Picture
Handleidingen Type: Gegevensblad
Pagina's: 12
Maat: 186.46 Kbytes (190940 Bytes)
Taal: Engels
Herziening van: C
Manual-ID/Number: 1264012
Datum: maart 2002
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
MD5: 46237362669f2b7f0620eacb4636484d
Downloads: 234 Sinds 29 november 2014
Start gratis downloaden

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics