Tektronix 2445/2465 OPTION 09 Plug-In
Fabrikant:
Afbeelding 1 van 1
Als je nog andere foto's of handleidingen hebt voor de
Tektronix 2445/2465 OPTION 09 kun je de bestanden hier uploaden .
Model:
2445/2465 OPTION 09
Datum:
1985
Categorie:
Groep:
Omschrijving:
Counter/ Timer/Trigger with Word Recognizer
Informatie
The Counter/Timer/Trigger (Option 06, and Counter/
Timer/Trigger with Word Recognizer (Option 09, add the
following four capabilities to the Tektronix 2445 and 2465
Oscilloscopes:
1. Precision time-interval measurement.
2. Event and frequency counting.
3. Deiay-by-events triggering.
4. Logic triggering.
The 17-bit Word Recognizer Probe of Option 09 extends the
capabilities of these functions. The functions described in
this manual which use the Word Recognizer require the Word
Recognizer Option 09 and the 17-bit Word Recognizer Probe.
The Counter/Timer/Trigger and Counter/Timer/Trigger with
Word Recognizer options use the 2445 and 2465 alphanumeric
crt readout to display configuration menus and function results.
The Oscilloscope operators manual should be consulted for
operating information regarding the 2445 and 2465
instruments. The operation and specifications of functions
not described in this manual remain unchanged.
in addition to the standard instrument’s standard
accessories, the following standard Accessories are provided
with each instrument containing the 2445.2465 Option 06
Counter/Timer/Trigger:
1 2445.2465 Option 06 and Option 09 Counter/ Timer/Trigger
and Word Recognizer Operators Manual.
1 2445.2465 Option 06 and Option 09 Counter/ Timer/Trigger
and Word Recognizer Reference Card
1 2445.2465 Option 06 and Option 09 Counter/ Timer/Trigger
and Word Recognizer Reference Guide
Each instrument containing the Word Recognizer is provided
with the following standard Accessories in addition to those
mentioned for the Counter/Timer/Trigger:
1 P6407 Word Recognizer Probe package.
The following optional accessory is also available for these
options:
1 2445.2465 Option 06 and Option 09 Counter/ Timer/Trigger
and Word Recognizer Service Manual
Handleidingen type:
Gebruikershandleiding
Pagina’s:
44
Grootte:
2.11 Mbytes (2213234 Bytes)
Taal:
english
Herziening:
Revised
Handleidingen-ID:
070-4631-00
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2014 05 25
MD5:
1675846832e569db0116712fc458f4a6
Downloads:
1601
Informatie
LIST OF
ILLUSTRATIONS ... ii
LIST OF
TABLES ...
ii
OPERATORS SAFETY SUMMARY ... iii
Section 1 SPECIFICATION
INTRODUCTION ... 1-1
DESCRIPTION OF FUNCTIONS ... 1 -1
PERFORMANCE CONDITIONS ... 1-2
Section 2 PREPARATION FOR USE
OPERATING CONSIDERATIONS ... 2-1
POWER-UP TESTS ... 2-1
Section 3 CONTROLS, CONNECTORS,
AND INDICATORS
FRONT PANEL CONTROLS ... 3-1
REAR PANEL ... 3-2
READOUT DISPLAYS ... 3-2
Page
Section 4 OPERATING PROCEDURES
PRECISION TIME-INTERVAL
MEASUREMENTS ... 4-1
MENU MODE FUNCTION
SELECTION ... 4-2
WORD OUT SIGNAL ... 4-9
CONTROLLING INSTRUMENT
FUNCTIONS WITH THE GPIB ... 4-9
Section 5 OPERATOR’S CHECKS
INTRODUCTION ... 5-1
INITIAL SETUP ... 5-1
FREQUENCY VERIFICATION ... 5-1
DELAY VERIFICATION ... 5-2
Delta VERIFICATION ... 5-2
DELAY-BY-EVENTS ... 5-2
Section 6 OPTIONS AND Accessories
INTRODUCTION ... 6-1
OPTIONS ... 8-1
ACCESSORIES ... 6-1
Appendix A GPIB COMMAND REFERENCE CHANGE INFORMATION