Attrezzatura informazioni:

Keithley 224 Generatore di corrente
Produttore:
Keithley
Modello: 224
Data: 1984
Categoria: Strumenti di misura
Gruppo: Generatore di corrente
Descrizione: Programmable Current Source
Informazioni:
                                    The Model 224 is a programmable current source with full
range current output of 20,uA to 101 mA. The smallest step of
output current is 5nA. The Model 224 has a selectable
voltage compliance of up to 105V in IV increments. The
value of output current can be modified in two ways: manually
or automatically. The automatically modified current value
is incremented or decremented by the programmed rate. The
time button allows the modification of the programmed auto
increment/decrement rate. The control of the current value
modification can be activated by an external trigger pulse applied
to the EXTERNAL TRIGGER INPUT. At the completion
of the current value modification (each digit) the Model 224
outputs a pulse that has the specifications shown in Figure
2-5. This pulse can be used to trigger another instrument
(printer, DMM, controller, etc.1 to start its programmed task.
With the Model 2243 IEEE-488 interface option installed, the
Model 224 can be used with any measurement system that
uses ?he IEEE-488 bus. For detailed operating instructions of
the Model 2243 IEEE-488 interface option, refer to the Model
2243 Instruction Manual

Questi manuali sono disponibili per la macchina in oggetto:

Keithley -- 224 -- Servizio e manuale utente
Nome file: Keithley-3523-Manual-Page-1-Picture
Tipo manuale: Servizio e manuale utente
Pagine: 75
Dimensioni: 5.85 Mbytes (6130409 Bytes)
Lingua: inglese
Revisione: Fifth Printing
Manual-ID/Number: 224-901-01
Data: December 2001
Qualità: Documento scansionato, tutto leggibile.
Data di caricamento:
MD5: 996e2d118d061fc1f450859969532625
ed2kID: 035100d4015e800c0681698757ab2c19
Download: 307 da 20 May 2012
Informazioni:
Para. Title Page
SECTION 1 — GENERAL INFORMATION
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.3 Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.4 Manual Addenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.5 Safety Symbols and Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.6 Unpacking and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.7 Repacking for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1.8 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1.9 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
SECTION 2 — OPERATION
2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2 Preparation for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2.1 Correct Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2.2 Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2.3 Warm Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.3 Operating lnstructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.3.1 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.3.2 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.3.3 Rear Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.3.4 Output Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2.3.5 Inductive Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2.3.6 Response Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2.3.7 General Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2.3.8 Front Panel Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
2.3.9 Examples of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
2.4 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
2.4.1 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
2.4.2 Resistivity Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
2.4.3 Diode Characterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
2.4.4 Low Resistance “Lindeck” Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
2.5 Detailed Front Panel Controls Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
2.6 Detailed Rear Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-l 5
SECTION 3 — PERFORMANCE VERIFICATION
3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.2 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.3 Recommended Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.4 Initial Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.5 Performance Verification Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.5.1 100mA to 1mA Range Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.5.2 100μA and 10μA Range Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
SECTION 4 — THEORY OF OPERATION
4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.2 Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.3 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.4 Analog Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.5 Digital Board (Microcomputer). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Para.
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.7.1
5.7.2
5.7.3
5.7.4
5.8
5.8.1
6.1
6.2
6.3
6.4
6.5
Title Page
SECTION 5-MAINTENANCE
Introduction .................................................................................. 5-l
FuseReplacement ............................................................................. 5-l
LineVoltageSelection ......................................................................... 5-1
Disassembly......................................................~ ........................... 5-2
FanFilterMaintenance ......................................................................... 5-2
Special Handling of Static Sensitive Devices ....................................................... 52
Calibration ................................................................................... 5-4
RecommendedTestEquipment ................................................................ 5-4
Environmental Conditions. .................................................................... 5-4
Warmup.. ................................................................................ 5-4
Calibration Adjustments ...................................................................... 5-4
Troubleshooting .............................................................................. 5-5
DigitalSelfTest ............................................................................. 5-5
SECTION 6-REPLACEABLE PARTS
Introduction .................................................................................. 6-l
PartsList ..................................................................................... 6-l
Orderinglnformation ........................................................................... 6-l
FactoryService.. ............................................................................. 6-l
Schematic Diagrams and Component Location Drawings ............................................ 6-1
Keithley-3523-Manual-Page-1-Picture
Inizio Free Download


Keithley -- 224 -- Manuale d'uso
Nome file: Keithley-5611-Manual-Page-1-Picture
Tipo manuale: Manuale d'uso
Pagine: 40
Dimensioni: 477.84 Kbytes (489304 Bytes)
Lingua: inglese
Revisione:
Manual-ID/Number:
Data:
Qualità: Documento scansionato, la lettura in parte male, non in parte leggibile.
Data di caricamento:
MD5: 6fafc31921aa96b21c4f6b61686d5b69
ed2kID: e777a1f54425d9dfa8d3fbf4b6d79519
Download: 77 da 07 March 2014
Informazioni:
Quick Reference Guide
Keithley-5611-Manual-Page-1-Picture
Inizio Free Download


Commenti

Ancora nessun commento.

Aggiungi commento

* Richiesto
(non sarà pubblicata)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Is it true or false that green is a number?
 
Inserire la risposta:
 
Comunicami i nuovi commenti via e-mail.
 
Ricordami su questo computer.
 
 
Powered by Commentics