Symetrix 420 Amplificatore
Produttore:
Modello:
420
Data:
1999
Categoria:
Gruppo:
Descrizione:
Stereo Power Amplifier

Informazioni

THE 420 STEREO POWER Amplifier IS A TWO-CHANNEL POWER Amplifier for use in professional and commercial audio systems. The 420 may be operated as a two channel Amplifier with 20 watts (RMS) per channel, or as a single channel Amplifier capable of 40 watts (RMS) output (bridged-mono mode). The 420 is intended for use in powering near-field monitors, small reference speakers used for radio or audio for video reference, small paging speakers, multiple pairs of headphones, or as a general purpose line driver/distribution Amplifier. The 420 is easy to install and simple to operate as well. When used as a stereo Amplifier, a single ganged potentiometer controls the level of both channels. As a 2-channel amp there’s an independent level control for each channel. In conjunction with the level controls each channel has a bright red LED to indicate the onset of clipping. A front panel MODE switch mono sums (mixes) the two inputs. This feature is handy for broadcast and recording engineers who wish to check the mono compatibility of their signals. Commercial sound engineers can use this feature to mix paging signals or paging and music signals. In recording studios and other similar applica- tions, the 420 makes an ideal headphone Amplifier. You can drive one pair of phones from the front panel jack, or many pairs from the rear panel terminals. In fact, the 420 will drive multiple professional headphone sets such as the AKG K-240 to 122 dB SPL! While the 420 is compact (1 rack space) and low cost, one should not overlook it’s impres- sive performance data. Total harmonic distortion (THD) is less than .04% at 1 watt output (see the back of this page for complete specifications). The 420 is truly a professional amplifier—clean, crisp sound reproduction and total freedom from noise. As an added feature, the 420’s relatively low stray field emissions allow it to be racked next to a wide variety of audio and video equipment without adversely affecting the equipment’s performance. APPLICATIONS Recording and broadcast studio near field monitor amp Video suite audio monitor Amplifier Audio and video remote truck monitor amp Small paging system power Amplifier Background music Amplifier Recording and broadcast headphone system amp General purpose high level line driver FEATURES Compact (uses only 1 rack space) 20 watts/channel (stereo) 40 watts (mono bridged) Mono mix mode Front panel headphone jack Front panel output mute switch

mostra più dettagli

Manuale d'uso
Tipo di manuale:
Manuale d'uso
Pagine:
26
Dimensione:
426.89 Kbytes (437138 Bytes)
Lingua:
english
Revisione:
A
ID del manuale:
53420-0A00
Data:
1999 02 25
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2017 12 23
MD5:
3395fa3b0e3f7474ba6d7839bd1792ce
Scaricamenti:
717

Informazioni

Chapter 1 Introduction Chapter 2 Operator Safety Summary Chapter 3 Fast Setup Chapter 4 Front & Rear Panel Overview Chapter 5 420 Basics Chapter 6 Using the 420 Chapter 7 Applications Chapter 8 Technical Tutorial Chapter 9 Troubleshooting Chapter 10 Specifications Chapter 11 Warranty & Service Appendix A Disassembly Instructions & Bridged-Mono Mode Switch

mostra più dettagli

Scheda tecnica
Tipo di manuale:
Scheda tecnica
Pagine:
2
Dimensione:
340.43 Kbytes (348603 Bytes)
Lingua:
english
Revisione:
ID del manuale:
Data:
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2020 01 11
MD5:
fa905c142ae0f87c306f45fa2d538602
Caricatore:
pfsoft
Scaricamenti:
327